Lexmark 12N0009 Setup Guide - Page 34

Installing a firmwarecard, other Lexmark printers may not work

Get Lexmark 12N0009 - C 910n Color LED Printer PDF manuals and user guides
UPC - 734646560092
View all Lexmark 12N0009 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

4 Align the notches on the bottom of the card with the notches on the connector. 5 Push the memory card firmly into the connector until the latches on either end of the connector snap into place. It may require some force to fully seat the card. 6 Make sure each latch fits over the notch on the end of the card. Installing a firmware card Follow the instructions in this section to install a firmware card. If you have a Lexmark C910in, an ImageQuick™ firmware card is already installed. Note: Firmware cards designed for other Lexmark printers may not work with your printer. If an option card has been installed, you need to remove the option card before installing the firmware card. 1 Remove the system board access cover (see page 24). 28 Install memory and option cards

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
28
Install memory and option cards
4
Align the notches on the bottom of
the card with the notches on the
connector.
5
Push the memory card firmly into
the connector until the latches on
either end of the connector
snap
into place.
It may require some force to fully
seat the card.
6
Make sure each latch fits over the
notch on the end of the card.
Installing a
firmware card
Follow the instructions in this section to
install a firmware card.
If you have a Lexmark C910in, an
ImageQuick™ firmware card is already
installed.
Note:
Firmware cards designed for
other Lexmark printers may not work
with your printer.
If an option card has been installed, you
need to remove the option card before
installing the firmware card.
1
Remove the system board access
cover (see page 24).