Lexmark C4342 Users Guide - Page 225
Sleep Mode, Hibernate Mode, Notes on EPEAT-registered imaging equipment products
View all Lexmark C4342 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 225 highlights
Notices 225 Mode Description Power consumption (Watts) Scan The product is scanning hard‑copy documents. N/A Ready The product is waiting for a print job. 27.0 (CS730de, C4342); 25.0 (CS735de, C4352) Sleep Mode The product is in a high‑level energy‑saving mode. 1.0 Hibernate The product is in a low‑level energy‑saving mode. 0.1 Off The product is plugged into an electrical outlet, but the power 0.1 switch is turned off. The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous power draws may be substantially higher than the average. Values are subject to change. See www.lexmark.com for current values. Sleep Mode This product is designed with an energy-saving mode called Sleep Mode. The Sleep Mode saves energy by lowering power consumption during extended periods of inactivity. The Sleep Mode is automatically engaged after this product is not used for a specified period of time, called the Sleep Mode Timeout. Factory default Sleep Mode Timeout for this product (in minutes): 15 By using the configuration menus, the Sleep Mode Timeout can be modified between 1 minute and 120 minutes, or between 1 minute and 114 minutes, depending on the printer model. If the printer speed is less than or equal to 30 pages per minute, then you can set the timeout only up to 60 minutes or 54 minutes, depending on the printer model. Setting the Sleep Mode Timeout to a low value reduces energy consumption, but may increase the response time of the product. Setting the Sleep Mode Timeout to a high value maintains a fast response, but uses more energy. Some models support a Deep Sleep Mode, which further reduces power consumption after longer periods of inactivity. Hibernate Mode This product is designed with an ultra‑low power operating mode called Hibernate mode. When operating in Hibernate Mode, all other systems and devices are powered down safely. The Hibernate mode can be entered in any of the following methods: • Using the Hibernate Timeout • Using the Schedule Power modes Factory default Hibernate Timeout for this product in all countries or regions 3 days The amount of time the printer waits after a job is printed before it enters Hibernate mode can be modified between one hour and one month. Notes on EPEAT-registered imaging equipment products: • Standby power level occurs in Hibernate or Off mode. • The product shall automatically power down to a standby power level of ≤ 1 W. The auto standby function (Hibernate or Off) shall be enabled at product shipment.