Lexmark C4342 Users Guide - Page 97
Wireless, Banner Enable Network Connections, Enable LLDP, Setup Using Mobile App
View all Lexmark C4342 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Use printer menus 97 Menu item Description Banner Page Off* On Print a banner page. Enable Network Connections Off On* Enable the printer to connect to a network. Enable LLDP Off* On Enable Link Layer Discovery Protocol (LLDP) in the printer. Note: An asterisk (*) next to a value indicates the factory default setting. Wireless Note: This menu is available only in printers connected to a Wi‑Fi network or printers that have a wireless network adapter. Menu item Setup Using Mobile App Setup On Printer Panel Choose Network Add Wi‑Fi Network Network Name Network Mode Infrastructure Wireless Security Mode Disabled* WEP WPA2/WPA - Personal WPA2 - Personal Wi‑Fi Protected Setup WPS Auto Detect Off On* Start Push Button Method Start PIN Method Network Mode BSS Type Infrastructure* Description Configure the Wi‑Fi connection using Lexmark Mobile Assistant. Configure the Wi‑Fi connection using the control panel. Establish a Wi‑Fi network and enable network security. Notes: • WPS Auto Detect appears only when the Wireless Security Mode is set to WEP. • Start Push-Button Method connects the printer to a Wi‑Fi network when buttons on both the printer and the access point (wireless router) are pressed within a given time. • Start PIN Method connects the printer to a Wi‑Fi network when a PIN on the printer is entered into the wireless settings of the access point. Specify the network mode.