Lexmark C4342 Users Guide - Page 36

Set up, install, and configure 36 Notes: • An ISD or a hard disk is required to activate formsmerge and other features. • Some IPDS features require an ISD or a hard disk. Installing optional trays CAUTION-SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet, and then from the printer. 3 Unpack the optional tray, and then remove all the packing material. Note: If optional trays are already installed, then unlock them from the printer before lifting the printer. Do not try to lift the printer and trays at the same time. 4 Install the printer on top of the optional tray until it clicks into place. CAUTION-POTENTIAL INJURY: If the printer weight is greater than 20 kg (44 lb), then it may require two or more people to lift it safely.