Lexmark C540 User's Guide - Page 116
Administrative support, Restoring the factory default settings, Using the Embedded Web Server
View all Lexmark C540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Administrative support Restoring the factory default settings Menu settings marked with an asterisk (*) indicate the active settings. You can restore the original printer settings, often referred to as the factory default settings. If you want to retain a list of the current menu settings for reference, then print a menu settings page before you restore the factory default settings. Warning-Potential Damage: Restoring factory default settings returns most printer settings to the original factory default setting. All downloaded resources in the printer memory are deleted. This includes fonts, macros, and symbol sets. 1 Make sure the printer is on and Ready appears. 2 From the printer control panel, press . 3 Press the arrow buttons until Settings appears, and then press . 4 Press the arrow buttons until General Settings appears, and then press . 5 Press the arrow buttons until Factory Defaults appears, and then press . 6 Press the arrow buttons until Restore Now appears, and then press . Submitting changes appears briefly. 7 Press , and then press until Ready appears. Using the Embedded Web Server If the printer is installed on a network, the Embedded Web Server is available for a range of functions: • Configuring printer settings • Checking the status of the printer supplies • Configuring network settings • Viewing reports • Restoring the factory default settings • Viewing the virtual display • Setting Web page password protect • Setting Panel PIN protect • Setting the date and time To access the Embedded Web Server: 1 Type the printer IP address into the address field of your Web browser. Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address in the TCP/IP section. 2 Click one of the tabs to access information about the printer, change settings, or view a report. Note: If the printer is connected to a computer by a USB or parallel cable, then open the Local Printer Settings Utility for Windows or Printer Settings for Macintosh to access printer menus. Administrative support 116