Lexmark C782 Help Menu Pages - Page 25

Repetitive defects guide, Change ITU

Page 25 highlights

Repetitive defects guide Repetitive defects guide Page 1 of 1 Match a set of repeating defects on a print job to the marks on one of the vertical lines. The line that best matches the defects on the print job indicates which particular part is causing the defect. Change cartridge 46 mm (1.8 in.) For example, the distance between these two marks represents a repeating defect that occurs every 93.3 mm, which means the print cartridge is the component that needs replacing. Change fuser 120 mm (4.7 in.) Change fuser 148 mm (5.8 in.) Change cartridge 93.3 mm (3.7 in.) Change ITU transfer roll 59.4 mm (2.3 in.) Change ITU 101 mm (4.0 in.)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25

Repetitive defects guide
Page 1 of 1
Repetitive defects guide
Change cartridge
46 mm
(1.8 in.)
Change cartridge
93.3 mm
(3.7 in.)
Change ITU
101 mm
(4.0 in.)
Change ITU transfer roll
59.4 mm
(2.3 in.)
Change fuser
120 mm
(4.7 in.)
Match a set of repeating
defects on a print job to
the marks on one of the
vertical lines. The line that
best matches the defects
on the print job indicates
which particular part is
causing the defect.
For example, the
distance between
these two marks
represents a
repeating defect
that occurs every
93.3 mm, which
means the print
cartridge is the
component that
needs replacing.
Change fuser
148 mm
(5.8 in.)