Lexmark E320 Service Manual - Page 100
Cover interlock switch service check (E220/E321/E323), Service Manual
UPC - 734646511162
View all Lexmark E320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
4500 Cover interlock switch service check (E220/E321/E323) Note: Make sure a toner cartridge is installed and the cover closes all the way, engaging the cover open switch lever. FRU Cover interlock switch Action Disconnect the cover interlock cable from the controller card at J6. Verify continuity between cable pin 1 and pin 2 with the door closed. Verify continuity between cable pin 1 and pin 3 with the door open. • If either fail continuity, replace the cover interlock switch. • If both pass continuity, turn the printer on and verify +5 V dc on pin 2 at J6 on the card. • Verify pins1 and 3 are ground. • If voltage or ground is not present, see "Controller card service check (E220/E321/E323) " on page 2-67 for more information. Verify discontinuity between pins 2 and 3 whether the door is open or closed. Replace the cover interlock switch if faulty. 2-70 Service Manual