Lexmark E320 Service Manual - Page 35
E320/E322, Host interface error, This error is only detected during the power-on cycle.
UPC - 734646511162
View all Lexmark E320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
4500-E320/E322 Host interface error This error is generated when the printer detects an error communicating with the host computer. There are three causes of this error: 1. Parallel external network adapter (ENA) connection is lost during the printer's power-on cycle. Once a connection is initially established, a printer setting is modified to note that the connection exists. Then, each time the power is cycled on the printer, if the setting states a connection exists, the printer attempts to communicate with the adapter. If the adapter does not respond, a message is posted. This error is only detected during the power-on cycle. This means if the external network adapter connection is lost after the power-on cycle is complete, this error is not detected. The printer cannot distinguish between an adapter which is quiet, for example, not sending any data, and an adapter which has been disconnected. Diagnostic information 2-5