Lexmark E320 Service Manual - Page 238

4500 reset service error codes 2-11, 2-45 defaults (E320/E322) 3-13 controller card error 2-55 operator panel 3-19 controller software error 2-45 user defaults (E320/E322) 2-100 controller software/illegal trap 2-45 RIP connectors (E220/E321/E323) engine circuitry error 2-53 5-7 engine flash error 2-46 RIP connectors (E320/E322) 5-6 engine software error 2-46 fan stalled error 2-49 S fuser error 2-48 safety information 1-xvii network error 2-57 service checks NVRAM failure 2-54 controller card (E220/E321/E323) paper communication failure 2-58 2-67 primary 2-8 cooling fan (E220/E321/E323) ASIC register failure 2-20 2-66 ASIC SRAM failure 2-21 cooling fan (E320/E322) 2-65 base memory 2-18 cover interlock (E220/E321/E323) conditions not reported 2-24 2-70 engine failure 2-24 cover interlock (E320/E322) 2-69 errors not reported 2-24 dead machine 2-71 flash memory failure 2-22 engine board (E320/E322) 2-72 font checksum failure 2-23 fuser 2-74 fuser failure-over temp. 2-12 cold fuser 2-64 fuser failure-printing 2-13 hot fuser 2-76 fuser failure-standby 2-13 LVPS power supply 2-76 fuser failure-under temp. 2-12 main motor 2-77 fuser-thermistor open 2-14 operator panel 2-79 mirror motor failure 2-15 operator panel button 2-78 NVRAM failure 2-19 paper feed 2-81 optional memory 2-16 paper jam during POST 2-81 ROM checksum failure 2-17 paper jam-registration roll 2-84 printhead error 2-50 paper never picks 2-83 RAM memory error 2-56 paper picks but stops 2-82 RIP to engine error 2-51, 2-52 paper picks during POST 2-81 secondary 2-9 paper picks sheets 2-83 software 2-11 paper skews 2-84 subcode 2-10 paper trees, curls 2-84 toner sensor error 2-49 parallel port 2-85 transfer roll error 2-47 print quality 2-86 transport motor error 2-51 image density 2-89 service error secondary lights 2-43 light print 2-90 service information lights 2-42 partial blank image 2-89 poor fusing of image 2-90 toner on back of page 2-91 white or black lines 2-91 transfer roll 2-99 I-10 Service Manual