Lexmark E320 Service Manual - Page 115
Parallel port service check, Ready on Parallel protocol
UPC - 734646511162
View all Lexmark E320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
4500 Parallel port service check 1. Perform a print test to make sure the printer prints correctly. See "Ready " on page 2-3 or page 2-36 for more information. 2. Be sure the printer cable is designed for bidirectional printing. 3. Be sure the user Program is set up correctly. 4. For E320/E322, try enabling the parallel port pull-up resistors. See "Parallel protocol " on page 3-25. Try printing a test page after enabling resistors. If the printer still does not print, disable the resistors. E220/E321/E323 printers do not support Mode 1; pull-up resistors are enabled. 5. If the internal print test page prints correctly, the user Program/printer driver is set up correctly and the correct bidirectional parallel cable is installed, but the printer still fails to print on command from the host computer, replace the controller card. Diagnostic information 2-85