Lexmark E322 User's Guide - Page 108
AppleTalk, Finding the default AppleTalk name, Creating a desktop printer icon
UPC - 734646512169
View all Lexmark E322 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
5 Try printing from some other application. If the job prints from the second application, you've narrowed the problem to the first application. Make sure you are using the current version of the driver for the problem application. 6 Place a job in the queue using a Novell utility such as PCONSOLE. AppleTalk Finding the default AppleTalk name Your printer ships with a default AppleTalk name that appears in the Chooser. To find the default AppleTalk name, press the operator panel button to print a network setup page. Look under the AppleTalk heading for the printer name. Creating a desktop printer icon Each Macintosh user on the AppleTalk network who wants to use the printer should do the following steps. 1 In the Chooser, select the LaserWriter 8 driver. 2 If you have a routed network, there is a list of zones you can select from. The new printer is in the default zone for the network. Select this zone. If you don't know which zone to select, look on the network setup page under AppleTalk for Zone. 3 Select the new printer. If you don't know which printer to select, look on the network setup page under AppleTalk. The default name of the printer is listed beside Name. 4 Click Create. 5 If prompted to select a PPD (PostScript Printer Description), you need to install the proper PPD from the drivers CD. To do this, launch the CD, click Installer, select the appropriate PPD for your printer, and then click Install. Go back to the Chooser and try to create the new printer again. Note: A PPD describes the printer or printer family. For example, the PPD lists which options are valid for the printer. 6 Look for an icon in the Chooser next to the printer name. This means you have successfully set up the new printer and a new desktop printer icon is on your desktop. 7 In the Chooser, select the printer you want to use and then close the Chooser window. 106