Lexmark E322 User's Guide - Page 87
Parallel Mode 2, This light sequence in, advanced troubleshooting, Corresponds to this setting
UPC - 734646512169
View all Lexmark E322 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
This light sequence in advanced troubleshooting mode: Corresponds to this setting: For E320 and E322 printers, Parallel Mode 1 is set to On, the factory default. This setting disables the pull-up resistors on the parallel port signals. It is useful for computers that have open collector outputs on the parallel port signals. • Press the operator panel button with a double button press to scroll to the next menu item, Parallel Mode 2. • Turn off the printer to exit the advanced troubleshooting mode. For E320 and E322 printers, Parallel Mode 2 is set to On, the factory default. This setting determines if the parallel port data is sampled on the leading or trailing edge of strobe. If Parallel Mode 2 is set to On, the parallel port data is sampled on the leading edge of strobe. The parallel port data is sampled on the trailing edge of strobe if Parallel Mode 2 is set to Off. • Press the operator panel button with a brief button press to scroll through the settings (On, Off). To turn off this setting, press the operator panel button with a long button press to select and save the Off setting. As the setting is saved, all operator panel lights remain on for approximately 2 seconds • Press the operator panel button with a double button press to scroll to the next menu item, Parallel Strobe Adjust. Turn off the printer to exit the advanced troubleshooting mode. 85