Lexmark E322 User's Guide - Page 112
Error conditions, Unrecoverable software error. Call Customer
UPC - 734646512169
View all Lexmark E322 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Menu Test Error conditions What shows on the four indicator lights Description Cause and solution binary 12 (for 0.25 sec), binary 3 (for 0.25 sec), repeat continuously. Serious failure. Unrecoverable software error. Call Customer The print server is unable Support. to recover. binary 15 (for 0.25 sec), binary x (for 0.25 sec), repeat continuously. POST error where x could be 0, 1, 2, 3, 4, 5, 6, 7, 8, or 9 Power-on self test error. During start-up, a hardware failure was detected on the print server. • Press the Menu and Test buttons simultaneously to reset the print server. • If the problem reoccurs, call Customer Support. binary 9 (for 1 sec) binary 6 (for 1 sec) repeat continuously. The print server is not connected to the network. Print a network setup page and look under Status. If it shows the printer server is not connected: • Make sure the Ethernet cable is firmly plugged in. • Try another wall outlet. 110