Lexmark E322 User's Guide - Page 77
Make sure the metal plate is pressed down before inserting it, into the printer.
UPC - 734646512169
View all Lexmark E322 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Problem The media skews or buckles. The paper sticks together/printer feeds multiple sheets of paper. The paper fails to feed from tray 1. The paper fails to feed from the optional tray 2. What to do • Don't overfill tray 1 or the optional tray 2 (see media capacities in the Media types and sizes table. • Make sure the paper guides are flush against the edges of the media. • Remove the paper from tray 1 or the optional tray 2 and fan the paper. • Don't overfill tray 1 or the optional tray 2 (see media capacities in the Media types and sizes chart. • Remove the paper from tray 1 and fan the paper. • Make sure tray 1 is selected from the printer driver. • Do not overfill the tray. • Make sure the optional tray 2 is selected from the printer driver. • Make sure the tray is pushed all the way in. • Make sure the metal plate is pressed down before inserting it into the printer. The Load Paper light is on even though there is paper loaded in the optional tray 2. Note: After the tray is inserted, the metal plate springs back up so the paper can feed into the printer. • Make sure the paper does not exceed the stack height indicator. • Make sure the paper is under both corner bucklers (see Loading Paper). • Remove the paper from the optional tray 2 and fan the paper. • Make sure the tray is pushed all the way in. 75