Lexmark E322 User's Guide - Page 49
Reinstall the print cartridge., If the jam occurs in the fuser
UPC - 734646512169
View all Lexmark E322 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
If the jam occurs in the fuser: 1 Open the printer cover. 2 Remove the print cartridge (it may be warm). Note: Exposing the photoconductor to light may damage the print cartridge. After you remove the print cartridge from the printer, cover it or store it in a clean, dark place. 3 Gently pull out the media. Fuser Roller CAUTION: Avoid touching the fuser, it may be hot! 4 If the media is jammed tightly behind the roller, or if you just can't get a grip on it, close the cover, open the front output door, and pull out the paper. 5 Make sure there is no more media in the printer. 6 Reinstall the print cartridge. 7 Close the printer cover to resume printing. A jam may occur if the output bin is too full and the media is unable to exit the printer: 1 Empty the media from the output bin. 2 Clear the jam. 47