Lexmark E323 Setup Guide - Page 33
Attaching a networkcable, Parallel cable, Ethernet cable - parts
UPC - 734646384216
View all Lexmark E323 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Parallel cable If you see a message other than Ready on the display, refer to the publications CD for instructions on clearing the message. Click Printing, and then click Understanding printer messages. 4 Turn on your computer and any other peripherals. 5 Go "Install drivers for local printing" on page 27. A parallel port requires an IEEE-1284 compliant parallel cable such as Lexmark part number 1329605 (3 m [10 ft]) or 1427498 (6 m [20 ft]). Attaching a network cable You can attach your Lexmark E323n printer to a network using standard network cables. Ethernet cable Use Category 5 cable with an RJ-45 connector for the standard network port. A 10BaseT/100BaseTx Fast Ethernet port is standard on the network model. To attach the printer to a network: 1 Make sure the printer is turned off and unplugged. 2 Plug one end of the standard network cable into a LAN drop or hub and the other end into the Ethernet port on the back of the printer. The printer automatically adjusts for the network speed. 3 Plug one end of the printer power cord into the socket at the back of the printer and the other end into a properly grounded outlet. 4 Now turn on the printer. After the printer completes its internal tests, the Ready message indicates that the printer is ready to receive jobs. Attach cables 25