Lexmark E323 Setup Guide - Page 37
Using Windows 2000, with USB or, parallel cable, D:\Drivers\Win_2000 - driver windows 7
UPC - 734646384216
View all Lexmark E323 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Using Windows 2000 with USB or parallel cable Note: You need administrative access to install printer drivers on your computer. Using Windows Me with USB or parallel cable Note: Depending on the software and printers already installed on your computer, your screens may vary from those in the instructions. When the Found New Hardware Wizard screen appears: 1 Insert the drivers CD. If the CD auto launches, exit the CD. Click Next. 2 Select Search for a suitable driver, and click Next. 3 Select only Specify a location, and click Next. 4 Browse to the location of the printer driver on the drivers CD. D:\Drivers\Win_2000\ 5 Click Open, and then click OK. 6 Click Next to install the driver that is displayed. Disregard the message that the driver is not digitally signed. 7 Click Finish when the software is installed. 8 Print a test page to verify printer setup a Click Start Settings Printers. b Select the printer you just created. c Click File Properties. d Click Print Test Page. When a test page prints successfully, printer setup is complete. You must install both a USB port driver and an enhanced custom print driver. When the Found New Hardware Wizard screen appears. 1 Insert the drivers CD. If the CD auto launches, exit the CD. Click Next. 2 Select Automatic search for the best driver (recommended), and then click Next. The wizard searches for a USB port driver. The name of it will be similar to your printer name. 3 After the USB port driver is found, click Finish. 4 Select Automatic search for the best driver (recommended), and then click Next. The wizard now searches for a printer driver. Install drivers for local printing 29