Lexmark E323 Setup Guide - Page 43

Step8: Verify printer setup, Turning on theprinter, Printing setup s - all lights blinking

Get Lexmark E323 - Printer - B/W PDF manuals and user guides
UPC - 734646384216
View all Lexmark E323 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

Step 8: Verify printer setup Turning on the printer Printing setup pages 1 Plug one end of the printer cord into the power cord connector at the back of the printer and the other end into a properly grounded outlet. 2 Turn on the printer. All indicator lights cycle (each light blinks, from top to bottom, and then cycles again). Print a Menu Settings page for a list of current printer settings. If you have a Lexmark E323n, your printer prints both a Menu Settings page and a Network Setup page, listing the IP address and other network settings. 1 Press and release Continue to print the page(s). 2 On the Menu Settings page: • Verify that the options you installed are correctly listed under "Installed Features." If an option you installed is not listed on the Menu Settings page, turn the printer off, unplug the power cord, and reinstall the option. • Verify that the amount of memory installed is correctly listed under "Printer Information." Verify that the paper trays are configured for the sizes and types of paper you loaded. 3 On the Network Setup page, confirm that Status is "Connected." If Status is "Not Connected," your LAN drop may not be active or your network cable may be malfunctioning. Consult your network support person for a solution, and then print another Network Setup page to verify that you are connected to your network. Save the network setup page for later use. Verify printer setup 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
35
Verify printer setup
Step 8: Verify printer setup
Turning on
the printer
1
Plug one end of the printer cord into the power cord connector
at the back of the printer and the other end into a properly
grounded outlet.
2
Turn on the printer.
All indicator lights cycle (each light blinks, from top to bottom,
and then cycles again).
Printing
setup pages
Print a Menu Settings page for a list of current printer settings. If you
have a Lexmark E323n, your printer prints both a Menu Settings page
and a Network Setup page, listing the IP address and other network
settings.
1
Press and release
Continue
to print the page(s).
2
On the Menu Settings page:
•
Verify that the options you installed are correctly listed under
“Installed Features.”
If an option you installed is not listed on the Menu Settings
page, turn the printer off, unplug the power cord, and
reinstall the option.
•
Verify that the amount of memory installed is correctly listed
under “Printer Information.” Verify that the paper trays are
configured for the sizes and types of paper you loaded.
3
On the Network Setup page, confirm that Status is “Connected.”
If Status is “Not Connected,” your LAN drop may not be active
or your network cable may be malfunctioning. Consult your
network support person for a solution, and then print another
Network Setup page to verify that you are connected to your
network.
Save the network setup page for later use.