Lexmark M410 User's Guide - Page 223
Understanding OptionCards, Internal Print Server (Internal Network Adapter or INA)
UPC - 734646261005
View all Lexmark M410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 223 highlights
Understanding Option Cards Note: Only one option card can be installed in your printer at a time. Four kinds of option cards are available for your printer: • Internal print server option card • Tri-Port interface option card • Hard disk option • Parallel/USB interface option card Refer to the documentation that is included with each option card for detailed information about that specific card. The installation instructions are the same for each type of option card; therefore, they are grouped together. Installation instructions begin on page 216. Internal Print Server (Internal Network Adapter or INA) Network Port An optional internal print server lets you connect your printer to a local area network (LAN). You can install one print server in your printer. There are MarkNetTM cards available to support the following topologies: • Ethernet (100BaseTX, 10BaseT, 10Base2) • Token-Ring (DB9 or RJ45) Internal print servers have a similar size and shape. Make sure the network port on the card corresponds to your network cable requirements. Refer to the documentation that came with the print server for more information. Card Connector Points Installing the Optional Internal Print Server To install, complete the following two sections in order: • "Accessing the Printer System Board" on page 201 • "Installing an Option Card" on page 216 Understanding Option Cards 211