Lexmark M410 User's Guide - Page 229
discard the plate., Align the connector on the option card with
UPC - 734646261005
View all Lexmark M410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 229 highlights
3 Remove the metal plate covering the connector slot. a Locate the two screws on the back of the printer that attach the metal plate to the slot. b Remove and save the two screws. Remove and discard the plate. 4 Unpack the option card. Save the packing materials. Faceplate Opening 5 Align the connector on the option card with the connector on the system board. The cable connectors on the side of the option card must fit through the opening in the faceplate. 6 Push the option card firmly into the option card connector on the system board. Option Card Connector Installing an Option Card 217
217
Installing an Option Card
3
Remove the metal plate covering the connector
slot.
a
Locate the two screws on the back of the printer
that attach the metal plate to the slot.
b
Remove and save the two screws. Remove and
discard the plate.
4
Unpack the option card.
Save the packing materials.
5
Align the connector on the option card with the
connector on the system board.
The cable connectors on the side of the option card
must fit through the opening in the faceplate.
6
Push the option card firmly into the option card
connector on the system board.
Faceplate Opening
Option Card Connector