Home » Lexmark Manuals » Multifunction Devices » Lexmark X925 » Manual Viewer

Lexmark X925 IPDS Emulation User's Guide - Page 115

Memory Requirements and Recommendations, Lexmark C792 standard 512MB

Add to My Manuals
Save this manual to your list of manuals

Page 115 highlights

F. Memory Requirements and Recommendations Additional memory above the minimum recommended may be required for printing DBCS characters, TrueType fonts, complex mono or color IPDS jobs (including CMOCA jobs) or if printer memory is used to save other emulation resources or hold other emulation jobs for later printing. In the tables below, you will see that some values apply when "saving of IPDS resources" is activated. Activation requires that the host timeout and printer IPDS Timeout values are properly set (refer to page 21 section 3.3.16 IPDS Timeout" for more information). Optional installed memory is listed under the Installed Features section on the print menu page. Total installed memory (standard memory + installed feature memory) is listed under the Device Information section on the print menu page (see Printing the Menu Settings Page on page 10.) Lexmark C792 (standard 512MB): IPDS print resolution 4800 CQ 4800 CQ 4800 CQ 4800 CQ 4800 CQ Job attributes Simplex/Duplex Simplex and saving IPDS resources Duplex and saving IPDS resources DBCS, TrueType, Complex Jobs CMOCA Jobs Recommended optional memory 256MB 256MB 512MB 512MB 1200 dpi 1200 dpi 1200 dpi 1200 dpi 1200 dpi Simplex/Duplex Simplex and saving IPDS resources Duplex and saving IPDS resources DBCS, TrueType, Complex Jobs CMOCA Jobs 512MB 512MB 512MB 1GB 1GB Lexmark C925 (standard 256MB): IPDS print resolution 1200 Image Q 1200 Image Q 1200 Image Q 1200 Image Q 1200 Image Q Job attributes Simplex/Duplex Simplex and saving IPDS resources Duplex and saving IPDS resources DBCS, TrueType, Complex Jobs CMOCA Jobs Recommended optional memory 512MB 512MB 1GB 1GB Lexmark C950 (standard 1024 MB): IPDS Print Resolution 2400 Image Q 2400 Image Q 2400 Image Q 2400 Image Q 2400 Image Q Job Attributes Simplex/Duplex Simplex and saving IPDS resources Duplex and saving IPDS resources DBCS, TrueType, Complex Jobs CMOCA Jobs Recommended optional memory 256MB 256MB 512MB 512MB 1200 dpi 1200 dpi 1200 dpi 1200 dpi Simplex/Duplex Simplex and saving IPDS resources Duplex and saving IPDS resources DBCS, TrueType, Complex Jobs 512MB 512MB 1GB 115

Section	Page
Introduction	7
1.1 About This Guide	7
1.2 Equipment Requirements and Specifications for IPDS Emulation Printing	7
1.3 Customer Support	8
1.4 Conventions Used in the Manual	9
2 Using the Control Panel for IPDS MENU Setup	10
2.1 IPDS MENU Setup Options vs. Printer Setup Options	10
2.2 Activation of New Menu Settings	10
2.3 Accessing the IPDS MENU	10
2.4 Printing the Menu Settings Page	10
3 Setup Operations Reference	12
3.1 IPDS MENU - Map of All Options	12
3.2 IPDS MENU – Default Values Overview	13
3.2.1 Emulation	13
3.2.2 Color Menu	13
3.2.3 Paper Handling	13
3.2.4 MAP Input Trays	14
3.2.5 Map Output Bins	14
3.2.6 Margins	14
3.2.7 Resource Capture	14
3.3 EMULATION – Options Descriptions	15
3.3.1 IPDS Emulation	15
3.3.2 Host Resolution	15
3.3.3 Color Processing	16
3.3.4 Toner Saver	16
3.3.5 BAR CODE	16
3.3.5.1 Bar Code Symbol	16
3.3.5.2 Bar Code Size	17
3.3.6 DEFAULT CODEPAGE	17
3.3.7 Codepage Version	18
3.3.8 DEFAULT FGID	18
3.3.9 Default CPI	18
3.3.10 Printable Area	18
3.3.11 Exception Control	19
3.3.12 Font Control	20
3.3.13 Font Style	20
3.3.14 IPDS Print Res	20
3.3.15 Intervention Required	21
3.3.16 IPDS Timeout	21
3.3.17 Fax Interrupt	22
3.3.18 Print Resource List	23
3.3.19 Trace Functions	23
3.3.20 IPDS Version	23
3.4 COLOR MENU – Options Descriptions	24
3.4.1 Color Management	24
3.4.2 User CMYK Profile	24
3.4.3 User RGB Profile	24
3.4.4 User Dest. Profile	25
3.4.5 RGB Grey to K	25
3.4.6 Preserve Black	25
3.4.7 Black Point Comp	25
3.4.8 Embedded ICC Prof	25
3.4.9 HL Mapping Table	26
3.4.10 OCA Mapping Table	26
3.4.11 DEF REND INTENT	27
3.4.12 CMOCA Options	27
3.4.12.1 CMOCA Options	27
3.4.12.2 Instruction CC	28
3.4.13 Remove User Files	28
3.5 PAPER HANDLING Menu – Option Descriptions	29
3.5.1 Offset Stacking	29
3.5.2 UNIVERSAL SIZE	29
3.5.3 OTHER ENV SIZE	31
3.6 MAP INPUT TRAYS Menu Options	33
3.7 MAP OUTPUT BINS Menu Options	36
3.7.1 Descriptions of Output Bin Values	36
3.7.2 Descriptions of IPDS Bin Selection Numbers	37
3.7.3 Default Bin Mapping	37
3.8 MARGINS Menu Options	38
3.8.1 ALL INPUT TRAYS	40
3.8.2 TRAY 1 ADJUST	40
3.8.3 TRAY 2 ADJUST	40
3.8.4 TRAY 3 ADJUST	41
3.8.5 TRAY 4 ADJUST	41
3.8.6 TRAY 5 ADJUST	42
3.8.7 MP FEEDER ADJUST	42
3.8.8 MANUAL PAPER ADJ	43
3.8.9 MANUAL ENV ADJ	43
3.9 RESOURCE CAPTURE Menu Options	44
3.9.1 Capture Media	44
3.9.2 Capture Fonts	45
3.9.3 Capture Data Objects	45
3.9.4 Capture CMR Objects	45
3.9.5 Remove Resources	45
4 Duplex Printing Using Preprinted Media	47
5 Finishing Support	48
5.1 Offset Stacking	50
5.1.1 AS/400 and iSeries Offset Stacking	50
5.1.2 Mainframe Offset Stacking	51
5.2 Stapling	53
5.2.1 AS/400 and iSeries Stapling	53
5.2.1.1 Lexmark C792, Lexmark X792 and Lexmark 6500e Optional Finisher	54
5.2.1.2 Lexmark C950, Lexmark X950, Lexmark X952 and Lexmark X954 Optional Standard Finisher	55
5.2.1.2.1 Corner Staple	55
5.2.1.2.2 Dual Staple (IPDS Edge stitch with 2 staples)	56
5.2.1.2.3 Double Dual Staple (IPDS Edge stitch with four staples)	57
5.2.1.3 Lexmark C950, Lexmark X950, Lexmark X952 and Lexmark X954 Optional Advanced Finisher Functions	58
5.2.1.3.1 Center Fold (IPDS Center Fold-in)	58
5.2.1.3.2 Saddle Staple (IPDS Saddle stitch-in)	58
5.3 Mainframe Stapling	60
5.3.1.1 Lexmark C792, Lexmark X792 and Lexmark 6500e Optional Finisher	60
5.3.1.2 Lexmark C950, Lexmark X950, Lexmark X952 and Lexmark X954 Optional Standard Finisher	61
5.3.1.3 Lexmark C950, Lexmark X950, Lexmark X952 and Lexmark X954 Optional Advanced Finisher Functions	62
5.3.1.3.1 Saddle Staple (IPDS Saddle stitch-in)	62
5.4 Hole Punch	63
5.4.1 Hole Punch From an Input Source	63
5.4.2 Hole Punch to an Output Bin	64
6 Color Management – User Files	65
6.1 Types of User Files:	65
6.2 Managing User Color files	66
6.2.1 Uploading a User Color file to the Printer	66
6.2.2 Delete a User File	67
7 IPDS Job Cancel	68
7.1 Canceling IPDS Jobs	68
7.2 How to Cancel a Job	68
8 Working with Captured Resources	69
8.1 Capture Resource and Remove Resources	69
8.2 Preparing Fonts for Capture	69
8.2.1 Capturing Fonts from an AS/400 or iSeries	70
8.2.1.1 Enabling Font Capture on the Printer	70
8.2.1.2 Program Requirements	70
8.2.1.3 Making Bitmap LF1 and Outline LF3 font Fonts Eligible for Capture on an iSeries host	70
8.2.1.4 Making TrueType Fonts eligible for Capture on an iSeries host	70
8.2.2 Capturing Fonts from a Mainframe Host	71
8.2.2.1 Enabling Font Capture on the Printer	71
8.2.2.2 Mainframe Program Requirements	71
8.2.2.3 Making Bitmap LF1 and Outline LF3 font Fonts Eligible for Capture on a Mainframe	71
8.2.2.4 Making TrueType Fonts eligible for Capture on mainframe	74
8.3 Preparing Data Objects (non-font resources) for Capture	74
8.3.1 Capturing Data Objects from an IBM Host	74
8.3.1.1 Enabling Data Object Capture on the Printer	74
8.3.1.2 Making Data Objects Eligible for Capture on the Host	74
8.4 Preparing CMOCA Resources for Capture	74
9 Remote Configuration of Printer IPDS Settings	76
9.1 Why Use a Browser	76
9.2 Remote Configuration Using a Browser	76
9.3 Functions that Can Not be Operated Remotely	77
9.4 Functions that Can ONLY be Operated Remotely	77
10 Printer Messages and Problems	78
11 Command Reference	79
11.1 XOA Print Quality Control	79
11.2 XOH OPC Product Identifier Self Defining Field	80
11.3 Finishing Operations Self-Defining Field	81
11.4 N-up Printing	82
11.5 Color and Simulated Grey Scale Printing	82
11.6 TrueType/OpenType Fonts	82
11.7 Object Container Support	82
11.8 Media Reporting by Object ID (OID)	83

Match case Limit results 1 per page

115

Memory Requirements and Recommendations

Additional memory above the minimum recommended may be required for printing DBCS characters,

TrueType fonts, complex mono or color IPDS jobs (including CMOCA jobs) or if printer memory is used

to save other emulation resources or hold other emulation jobs for later printing.

In the tables below, you will see that some values apply when ”saving of IPDS resources” is activated.

Activation requires that the host timeout and printer IPDS Timeout values are properly set (refer to page

21 section 3.3.16 IPDS Timeout” for more information).

Optional installed memory is listed under the Installed Features section on the print menu page. Total

installed memory (standard memory + installed feature memory) is listed under the Device Information

section on the print menu page (see Printing the Menu Settings Page on page 10.)

Lexmark C792 (standard 512MB):

IPDS print resolution

Job attributes

Recommended optional memory

4800 CQ

Simplex/Duplex

4800 CQ

Simplex and saving IPDS resources

256MB

4800 CQ

Duplex and saving IPDS resources

256MB

4800 CQ

DBCS, TrueType, Complex Jobs

512MB

4800 CQ

CMOCA Jobs

512MB

1200 dpi

Simplex/Duplex

512MB

1200 dpi

Simplex and saving IPDS resources

512MB

1200 dpi

Duplex and saving IPDS resources

512MB

1200 dpi

DBCS, TrueType, Complex Jobs

1GB

1200 dpi

CMOCA Jobs

1GB

Lexmark C925 (standard 256MB):

IPDS print resolution

Job attributes

Recommended optional memory

1200 Image Q

Simplex/Duplex

1200 Image Q

Simplex and saving IPDS resources

512MB

1200 Image Q

Duplex and saving IPDS resources

512MB

1200 Image Q

DBCS, TrueType, Complex Jobs

1GB

1200 Image Q

CMOCA Jobs

1GB

Lexmark C950 (standard 1024 MB):

IPDS Print Resolution

Job Attributes

Recommended optional memory

2400 Image Q

Simplex/Duplex

2400 Image Q

Simplex and saving IPDS resources

256MB

2400 Image Q

Duplex and saving IPDS resources

256MB

2400 Image Q

DBCS, TrueType, Complex Jobs

512MB

2400 Image Q

CMOCA Jobs

512MB

1200 dpi

Simplex/Duplex

1200 dpi

Simplex and saving IPDS resources

512MB

1200 dpi

Duplex and saving IPDS resources

512MB

1200 dpi

DBCS, TrueType, Complex Jobs

1GB