Home » Lexmark Manuals » Multifunction Devices » Lexmark X925 » Manual Viewer

Lexmark X925 IPDS Emulation User's Guide - Page 2

Notice, Trademarks and Credits, AFP, AS/400, IBM, iSeries, MVS, OS/2, OS/390, Print Services Facility - time change

Add to My Manuals
Save this manual to your list of manuals

Page 2 highlights

2nd edition, April 2011, Rev 002 © Copyright Lexmark International, Inc., 2011 All rights reserved. © Copyright Kodak, 2011 Notice The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC. AND KODAK PROVIDE THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time. References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user's responsibility. Trademarks and Credits AFP, AS/400, IBM, iSeries, MVS, OS/2, OS/390, OS/400, Print Services Facility, PSF, System/390, zSeries, and z/OS are trademarks of International Business Machines Corporation in the United States, other countries, or both. InfoPrint, Infoprint, Intelligent Printer Data Stream, IPDS, Bar Code Object Content Architecture and BCOCA are trademarks or registered trademarks of Ricoh Co., Ltd. in the United States, other countries, or both. Lexmark and Lexmark with diamond design, MarkNet, and MarkVision are trademarks of Lexmark International, Inc. registered in the United States and/or other countries. PCL is a registered trademark of the Hewlett-Packard Company. PostScript is a registered trademark of Adobe Systems Incorporated. Barcode Engine for Data Matrix, MaxiCode, and QR Code by TEC-IT Datenverarbeitung GmbH, www.tec-it.com. This product is based in part on the work of the Free Type Project and the Independent JPEG Group. Other trademarks are the property of their respective owners. 2

Section	Page
Introduction	7
1.1 About This Guide	7
1.2 Equipment Requirements and Specifications for IPDS Emulation Printing	7
1.3 Customer Support	8
1.4 Conventions Used in the Manual	9
2 Using the Control Panel for IPDS MENU Setup	10
2.1 IPDS MENU Setup Options vs. Printer Setup Options	10
2.2 Activation of New Menu Settings	10
2.3 Accessing the IPDS MENU	10
2.4 Printing the Menu Settings Page	10
3 Setup Operations Reference	12
3.1 IPDS MENU - Map of All Options	12
3.2 IPDS MENU – Default Values Overview	13
3.2.1 Emulation	13
3.2.2 Color Menu	13
3.2.3 Paper Handling	13
3.2.4 MAP Input Trays	14
3.2.5 Map Output Bins	14
3.2.6 Margins	14
3.2.7 Resource Capture	14
3.3 EMULATION – Options Descriptions	15
3.3.1 IPDS Emulation	15
3.3.2 Host Resolution	15
3.3.3 Color Processing	16
3.3.4 Toner Saver	16
3.3.5 BAR CODE	16
3.3.5.1 Bar Code Symbol	16
3.3.5.2 Bar Code Size	17
3.3.6 DEFAULT CODEPAGE	17
3.3.7 Codepage Version	18
3.3.8 DEFAULT FGID	18
3.3.9 Default CPI	18
3.3.10 Printable Area	18
3.3.11 Exception Control	19
3.3.12 Font Control	20
3.3.13 Font Style	20
3.3.14 IPDS Print Res	20
3.3.15 Intervention Required	21
3.3.16 IPDS Timeout	21
3.3.17 Fax Interrupt	22
3.3.18 Print Resource List	23
3.3.19 Trace Functions	23
3.3.20 IPDS Version	23
3.4 COLOR MENU – Options Descriptions	24
3.4.1 Color Management	24
3.4.2 User CMYK Profile	24
3.4.3 User RGB Profile	24
3.4.4 User Dest. Profile	25
3.4.5 RGB Grey to K	25
3.4.6 Preserve Black	25
3.4.7 Black Point Comp	25
3.4.8 Embedded ICC Prof	25
3.4.9 HL Mapping Table	26
3.4.10 OCA Mapping Table	26
3.4.11 DEF REND INTENT	27
3.4.12 CMOCA Options	27
3.4.12.1 CMOCA Options	27
3.4.12.2 Instruction CC	28
3.4.13 Remove User Files	28
3.5 PAPER HANDLING Menu – Option Descriptions	29
3.5.1 Offset Stacking	29
3.5.2 UNIVERSAL SIZE	29
3.5.3 OTHER ENV SIZE	31
3.6 MAP INPUT TRAYS Menu Options	33
3.7 MAP OUTPUT BINS Menu Options	36
3.7.1 Descriptions of Output Bin Values	36
3.7.2 Descriptions of IPDS Bin Selection Numbers	37
3.7.3 Default Bin Mapping	37
3.8 MARGINS Menu Options	38
3.8.1 ALL INPUT TRAYS	40
3.8.2 TRAY 1 ADJUST	40
3.8.3 TRAY 2 ADJUST	40
3.8.4 TRAY 3 ADJUST	41
3.8.5 TRAY 4 ADJUST	41
3.8.6 TRAY 5 ADJUST	42
3.8.7 MP FEEDER ADJUST	42
3.8.8 MANUAL PAPER ADJ	43
3.8.9 MANUAL ENV ADJ	43
3.9 RESOURCE CAPTURE Menu Options	44
3.9.1 Capture Media	44
3.9.2 Capture Fonts	45
3.9.3 Capture Data Objects	45
3.9.4 Capture CMR Objects	45
3.9.5 Remove Resources	45
4 Duplex Printing Using Preprinted Media	47
5 Finishing Support	48
5.1 Offset Stacking	50
5.1.1 AS/400 and iSeries Offset Stacking	50
5.1.2 Mainframe Offset Stacking	51
5.2 Stapling	53
5.2.1 AS/400 and iSeries Stapling	53
5.2.1.1 Lexmark C792, Lexmark X792 and Lexmark 6500e Optional Finisher	54
5.2.1.2 Lexmark C950, Lexmark X950, Lexmark X952 and Lexmark X954 Optional Standard Finisher	55
5.2.1.2.1 Corner Staple	55
5.2.1.2.2 Dual Staple (IPDS Edge stitch with 2 staples)	56
5.2.1.2.3 Double Dual Staple (IPDS Edge stitch with four staples)	57
5.2.1.3 Lexmark C950, Lexmark X950, Lexmark X952 and Lexmark X954 Optional Advanced Finisher Functions	58
5.2.1.3.1 Center Fold (IPDS Center Fold-in)	58
5.2.1.3.2 Saddle Staple (IPDS Saddle stitch-in)	58
5.3 Mainframe Stapling	60
5.3.1.1 Lexmark C792, Lexmark X792 and Lexmark 6500e Optional Finisher	60
5.3.1.2 Lexmark C950, Lexmark X950, Lexmark X952 and Lexmark X954 Optional Standard Finisher	61
5.3.1.3 Lexmark C950, Lexmark X950, Lexmark X952 and Lexmark X954 Optional Advanced Finisher Functions	62
5.3.1.3.1 Saddle Staple (IPDS Saddle stitch-in)	62
5.4 Hole Punch	63
5.4.1 Hole Punch From an Input Source	63
5.4.2 Hole Punch to an Output Bin	64
6 Color Management – User Files	65
6.1 Types of User Files:	65
6.2 Managing User Color files	66
6.2.1 Uploading a User Color file to the Printer	66
6.2.2 Delete a User File	67
7 IPDS Job Cancel	68
7.1 Canceling IPDS Jobs	68
7.2 How to Cancel a Job	68
8 Working with Captured Resources	69
8.1 Capture Resource and Remove Resources	69
8.2 Preparing Fonts for Capture	69
8.2.1 Capturing Fonts from an AS/400 or iSeries	70
8.2.1.1 Enabling Font Capture on the Printer	70
8.2.1.2 Program Requirements	70
8.2.1.3 Making Bitmap LF1 and Outline LF3 font Fonts Eligible for Capture on an iSeries host	70
8.2.1.4 Making TrueType Fonts eligible for Capture on an iSeries host	70
8.2.2 Capturing Fonts from a Mainframe Host	71
8.2.2.1 Enabling Font Capture on the Printer	71
8.2.2.2 Mainframe Program Requirements	71
8.2.2.3 Making Bitmap LF1 and Outline LF3 font Fonts Eligible for Capture on a Mainframe	71
8.2.2.4 Making TrueType Fonts eligible for Capture on mainframe	74
8.3 Preparing Data Objects (non-font resources) for Capture	74
8.3.1 Capturing Data Objects from an IBM Host	74
8.3.1.1 Enabling Data Object Capture on the Printer	74
8.3.1.2 Making Data Objects Eligible for Capture on the Host	74
8.4 Preparing CMOCA Resources for Capture	74
9 Remote Configuration of Printer IPDS Settings	76
9.1 Why Use a Browser	76
9.2 Remote Configuration Using a Browser	76
9.3 Functions that Can Not be Operated Remotely	77
9.4 Functions that Can ONLY be Operated Remotely	77
10 Printer Messages and Problems	78
11 Command Reference	79
11.1 XOA Print Quality Control	79
11.2 XOH OPC Product Identifier Self Defining Field	80
11.3 Finishing Operations Self-Defining Field	81
11.4 N-up Printing	82
11.5 Color and Simulated Grey Scale Printing	82
11.6 TrueType/OpenType Fonts	82
11.7 Object Container Support	82
11.8 Media Reporting by Object ID (OID)	83

Match case Limit results 1 per page

edition, April 2011, Rev 002

Notice

……………………………………..……………………..

The following paragraph does not apply to any country where such provisions are inconsistent with local

law:

LEXMARK INTERNATIONAL, INC. AND KODAK PROVIDE THIS PUBLICATION "AS IS"

WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT

LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in

certain transactions, therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are periodically

made to the information herein; these changes will be incorporated in later editions. Improvements or

changes in the products or the programs described may be made at any time.

References in this publication to products, programs, or services do not imply that the manufacturer

intends to make these available in all countries in which it operates. Any reference to a product, program,

or service is not intended to state or imply that only that product, program, or service may be used. Any

functionally equivalent product, program, or service that does not infringe any existing intellectual

property right may be used instead. Evaluation and verification of operation in conjunction with other

products, programs, or services, except those expressly designated by the manufacturer, are the user’s

responsibility.

Trademarks and Credits

AFP, AS/400, IBM, iSeries, MVS, OS/2, OS/390, OS/400, Print Services Facility, PSF, System/390,

zSeries, and z/OS are trademarks of International Business Machines Corporation in the United States,

other countries, or both.

InfoPrint, Infoprint, Intelligent Printer Data Stream, IPDS, Bar Code Object Content Architecture and

BCOCA are trademarks or registered trademarks of Ricoh Co., Ltd. in the United States, other countries,

or both.

Lexmark and Lexmark with diamond design, MarkNet, and MarkVision are trademarks of Lexmark

International, Inc. registered in the United States and/or other countries.

PCL is a registered trademark of the Hewlett-Packard Company.

PostScript is a registered trademark of Adobe Systems Incorporated.

Barcode Engine for Data Matrix, MaxiCode, and QR Code by TEC-IT Datenverarbeitung GmbH,

www.tec-it.com.

This product is based in part on the work of the Free Type Project and the Independent JPEG Group.

Other trademarks are the property of their respective owners.