Home » Lexmark Manuals » Multifunction Devices » Lexmark X925 » Manual Viewer

Lexmark X925 IPDS Emulation User's Guide - Page 29

PAPER HANDLING Menu – Option Descriptions, 3.5.1 Offset Stacking, 3.5.2 UNIVERSAL SIZE

Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

3.5 PAPER HANDLING Menu - Option Descriptions In the following an asterisk "*" indicates the default factory value. Values only display when they are available on your printer. The selected value for each of these options can be printed; see Printing the Menu Settings Page on page 10. 3.5.1 Offset Stacking This option controls the offset stacking function. It is only displayed when offset stacking is supported in the printer standard bin or when an optional bin with offset stacking capability is installed. Offset stacking is only available in selected bins and may be limited to selected media. Bin selection has a higher priority than offset stacking commands in the IPDS job. The job must be routed to a bin that supports offset stacking and have offset stacking specified in the job before offset stacking will be performed. See section 5.1 on page 50 for additional information on offset stacking. Host Controlled* Offset stacking is controlled by the commands received in the IPDS job. Disabled Offset stacking is not performed. Offset stacking commands received in the IPDS jobs are ignored. 3.5.2 UNIVERSAL SIZE The IPDS emulation uses the paper size setting specified in the printer menu to determine the size loaded. The paper size is returned to the host. A printer paper size of "Universal" is displayed in the printer menu when a non-standard size paper is detected in an auto size sensing tray or is selected as the paper size loaded into a non-size sensing tray or feeder. This option allows you to specify the physical paper size returned to the host when a non-standard paper size is loaded. The paper size is specified in 300 dots per inch. Important: A 34 Incorrect Media, or paper jam message may be displayed if printing occurs past the length of the physical paper. You should specify the actual paper size to avoid errors. Product Lexmark C792 Lexmark X792 Lexmark C925 Lexmark X925 Menu Option UNIVERSAL SIZE > Paper Length UNIVERSAL SIZE > Paper Width UNIVERSAL SIZE > Paper Length Value Range 4200*, 900 to 6824 2550* 900 to 2550 5100*, 1749 to 6824 Function Specifies Universal paper size dimensions. See notes below. Lexmark C950 Lexmark X950 Lexmark X952 Lexmark X954 Lexmark X548 Lexmark 6500e UNIVERSAL SIZE > Paper Width UNIVERSAL SIZE > Paper Length UNIVERSAL SIZE > Paper Width UNIVERSAL SIZE > Paper Length UNIVERSAL SIZE > Paper Width 3510*, 1062 to 3510 5100* 900 to 6824 3510* 900 to 3510 4200* 900 to 4251 2550* 900 to 2550 29

Section	Page
Introduction	7
1.1 About This Guide	7
1.2 Equipment Requirements and Specifications for IPDS Emulation Printing	7
1.3 Customer Support	8
1.4 Conventions Used in the Manual	9
2 Using the Control Panel for IPDS MENU Setup	10
2.1 IPDS MENU Setup Options vs. Printer Setup Options	10
2.2 Activation of New Menu Settings	10
2.3 Accessing the IPDS MENU	10
2.4 Printing the Menu Settings Page	10
3 Setup Operations Reference	12
3.1 IPDS MENU - Map of All Options	12
3.2 IPDS MENU – Default Values Overview	13
3.2.1 Emulation	13
3.2.2 Color Menu	13
3.2.3 Paper Handling	13
3.2.4 MAP Input Trays	14
3.2.5 Map Output Bins	14
3.2.6 Margins	14
3.2.7 Resource Capture	14
3.3 EMULATION – Options Descriptions	15
3.3.1 IPDS Emulation	15
3.3.2 Host Resolution	15
3.3.3 Color Processing	16
3.3.4 Toner Saver	16
3.3.5 BAR CODE	16
3.3.5.1 Bar Code Symbol	16
3.3.5.2 Bar Code Size	17
3.3.6 DEFAULT CODEPAGE	17
3.3.7 Codepage Version	18
3.3.8 DEFAULT FGID	18
3.3.9 Default CPI	18
3.3.10 Printable Area	18
3.3.11 Exception Control	19
3.3.12 Font Control	20
3.3.13 Font Style	20
3.3.14 IPDS Print Res	20
3.3.15 Intervention Required	21
3.3.16 IPDS Timeout	21
3.3.17 Fax Interrupt	22
3.3.18 Print Resource List	23
3.3.19 Trace Functions	23
3.3.20 IPDS Version	23
3.4 COLOR MENU – Options Descriptions	24
3.4.1 Color Management	24
3.4.2 User CMYK Profile	24
3.4.3 User RGB Profile	24
3.4.4 User Dest. Profile	25
3.4.5 RGB Grey to K	25
3.4.6 Preserve Black	25
3.4.7 Black Point Comp	25
3.4.8 Embedded ICC Prof	25
3.4.9 HL Mapping Table	26
3.4.10 OCA Mapping Table	26
3.4.11 DEF REND INTENT	27
3.4.12 CMOCA Options	27
3.4.12.1 CMOCA Options	27
3.4.12.2 Instruction CC	28
3.4.13 Remove User Files	28
3.5 PAPER HANDLING Menu – Option Descriptions	29
3.5.1 Offset Stacking	29
3.5.2 UNIVERSAL SIZE	29
3.5.3 OTHER ENV SIZE	31
3.6 MAP INPUT TRAYS Menu Options	33
3.7 MAP OUTPUT BINS Menu Options	36
3.7.1 Descriptions of Output Bin Values	36
3.7.2 Descriptions of IPDS Bin Selection Numbers	37
3.7.3 Default Bin Mapping	37
3.8 MARGINS Menu Options	38
3.8.1 ALL INPUT TRAYS	40
3.8.2 TRAY 1 ADJUST	40
3.8.3 TRAY 2 ADJUST	40
3.8.4 TRAY 3 ADJUST	41
3.8.5 TRAY 4 ADJUST	41
3.8.6 TRAY 5 ADJUST	42
3.8.7 MP FEEDER ADJUST	42
3.8.8 MANUAL PAPER ADJ	43
3.8.9 MANUAL ENV ADJ	43
3.9 RESOURCE CAPTURE Menu Options	44
3.9.1 Capture Media	44
3.9.2 Capture Fonts	45
3.9.3 Capture Data Objects	45
3.9.4 Capture CMR Objects	45
3.9.5 Remove Resources	45
4 Duplex Printing Using Preprinted Media	47
5 Finishing Support	48
5.1 Offset Stacking	50
5.1.1 AS/400 and iSeries Offset Stacking	50
5.1.2 Mainframe Offset Stacking	51
5.2 Stapling	53
5.2.1 AS/400 and iSeries Stapling	53
5.2.1.1 Lexmark C792, Lexmark X792 and Lexmark 6500e Optional Finisher	54
5.2.1.2 Lexmark C950, Lexmark X950, Lexmark X952 and Lexmark X954 Optional Standard Finisher	55
5.2.1.2.1 Corner Staple	55
5.2.1.2.2 Dual Staple (IPDS Edge stitch with 2 staples)	56
5.2.1.2.3 Double Dual Staple (IPDS Edge stitch with four staples)	57
5.2.1.3 Lexmark C950, Lexmark X950, Lexmark X952 and Lexmark X954 Optional Advanced Finisher Functions	58
5.2.1.3.1 Center Fold (IPDS Center Fold-in)	58
5.2.1.3.2 Saddle Staple (IPDS Saddle stitch-in)	58
5.3 Mainframe Stapling	60
5.3.1.1 Lexmark C792, Lexmark X792 and Lexmark 6500e Optional Finisher	60
5.3.1.2 Lexmark C950, Lexmark X950, Lexmark X952 and Lexmark X954 Optional Standard Finisher	61
5.3.1.3 Lexmark C950, Lexmark X950, Lexmark X952 and Lexmark X954 Optional Advanced Finisher Functions	62
5.3.1.3.1 Saddle Staple (IPDS Saddle stitch-in)	62
5.4 Hole Punch	63
5.4.1 Hole Punch From an Input Source	63
5.4.2 Hole Punch to an Output Bin	64
6 Color Management – User Files	65
6.1 Types of User Files:	65
6.2 Managing User Color files	66
6.2.1 Uploading a User Color file to the Printer	66
6.2.2 Delete a User File	67
7 IPDS Job Cancel	68
7.1 Canceling IPDS Jobs	68
7.2 How to Cancel a Job	68
8 Working with Captured Resources	69
8.1 Capture Resource and Remove Resources	69
8.2 Preparing Fonts for Capture	69
8.2.1 Capturing Fonts from an AS/400 or iSeries	70
8.2.1.1 Enabling Font Capture on the Printer	70
8.2.1.2 Program Requirements	70
8.2.1.3 Making Bitmap LF1 and Outline LF3 font Fonts Eligible for Capture on an iSeries host	70
8.2.1.4 Making TrueType Fonts eligible for Capture on an iSeries host	70
8.2.2 Capturing Fonts from a Mainframe Host	71
8.2.2.1 Enabling Font Capture on the Printer	71
8.2.2.2 Mainframe Program Requirements	71
8.2.2.3 Making Bitmap LF1 and Outline LF3 font Fonts Eligible for Capture on a Mainframe	71
8.2.2.4 Making TrueType Fonts eligible for Capture on mainframe	74
8.3 Preparing Data Objects (non-font resources) for Capture	74
8.3.1 Capturing Data Objects from an IBM Host	74
8.3.1.1 Enabling Data Object Capture on the Printer	74
8.3.1.2 Making Data Objects Eligible for Capture on the Host	74
8.4 Preparing CMOCA Resources for Capture	74
9 Remote Configuration of Printer IPDS Settings	76
9.1 Why Use a Browser	76
9.2 Remote Configuration Using a Browser	76
9.3 Functions that Can Not be Operated Remotely	77
9.4 Functions that Can ONLY be Operated Remotely	77
10 Printer Messages and Problems	78
11 Command Reference	79
11.1 XOA Print Quality Control	79
11.2 XOH OPC Product Identifier Self Defining Field	80
11.3 Finishing Operations Self-Defining Field	81
11.4 N-up Printing	82
11.5 Color and Simulated Grey Scale Printing	82
11.6 TrueType/OpenType Fonts	82
11.7 Object Container Support	82
11.8 Media Reporting by Object ID (OID)	83

Match case Limit results 1 per page

3.5

PAPER HANDLING Menu – Option Descriptions

In the following an asterisk “*” indicates the default factory value. Values only display when they are

available on your printer. The selected value for each of these options can be printed; see Printing the

Menu Settings Page on page 10.

3.5.1 Offset Stacking

This option controls the offset stacking function. It is only displayed when offset stacking is supported in

the printer standard bin or when an optional bin with offset stacking capability is installed. Offset stacking

is only available in selected bins and may be limited to selected media.

Bin selection has a higher priority than offset stacking commands in the IPDS job. The job must be routed

to a bin that supports offset stacking and have offset stacking specified in the job before offset stacking

will be performed.

See section 5.1 on page 50 for additional information on offset stacking.

Host Controlled*

Offset stacking is controlled by the commands received in the IPDS job.

Disabled

Offset stacking is not performed. Offset stacking commands received in the IPDS

jobs are ignored.

3.5.2 UNIVERSAL SIZE

The IPDS emulation uses the paper size setting specified in the printer menu to determine the size loaded.

The paper size is returned to the host. A printer paper size of “Universal” is displayed in the printer menu

when a non-standard size paper is detected in an auto size sensing tray or is selected as the paper size

loaded into a non-size sensing tray or feeder.

This option allows you to specify the physical paper size returned to the host when a non-standard paper

size is loaded. The paper size is specified in 300 dots per inch.

Important:

34 Incorrect Media

, or paper jam message may be displayed if printing occurs past the

length of the physical paper. You should specify the actual paper size to avoid errors.

Product

Menu Option

Value Range

Function

Lexmark C792

Lexmark X792

UNIVERSAL SIZE >

Paper Length

4200*,

900 to 6824

Specifies Universal

paper size dimensions.

See notes below.

UNIVERSAL SIZE >

Paper Width

2550*

900 to 2550

Lexmark C925

Lexmark X925

UNIVERSAL SIZE >

Paper Length

5100*,

1749 to 6824

UNIVERSAL SIZE >

Paper Width

3510*,

1062 to 3510

Lexmark C950

Lexmark X950

Lexmark X952

Lexmark X954

UNIVERSAL SIZE >

Paper Length

5100*

900 to 6824

UNIVERSAL SIZE >

Paper Width

3510*

900 to 3510

Lexmark X548

Lexmark 6500e

UNIVERSAL SIZE >

Paper Length

4200*

900 to 4251

UNIVERSAL SIZE >

Paper Width

2550*

900 to 2550