Lexmark XC4342 Users Guide - Page 139

Use printer menus 139 Menu item Description Symbol Set [List of available symbol set] (10U PC‑8*) Specify the symbol set for each font name. Note: A symbol set is a set of alphabetic and numeric characters, punctuation, and special symbols. Symbol sets support the different languages or specific programs such as math symbols for scientific text. Pitch 0.08-100.00 (10.00*) Specify the pitch for fixed or monospaced fonts. Note: Pitch refers to the number of fixed‑space characters in a horizontal inch of type. Orientation Portrait* Landscape Reverse Portrait Reverse Landscape Specify the orientation of text and graphics on the page. Lines per Page 1-255 Specify the number of lines of text for each page printed through the PCL® data stream. Notes: • This menu item activates vertical escapement that causes the selected number of requested lines to print between the default margins of the page. • 60 is the U.S. factory default setting. 64 is the international factory default setting. PCL5 Minimum Line Width 1-30 (2*) Set the initial minimum stroke width. PCLXL Minimum Line Width 1-30 (2*) A4 Width 198 mm* 203 mm Set the width of the logical page on A4‑size paper. Note: Logical page is the space on the physical page where data is printed. Auto CR after LF On Off* Set the printer to perform a carriage return after a line feed control command. Note: Carriage return is a mechanism that commands the printer to move the position of the cursor to the first position on the same line. Auto LF after CR On Off* Set the printer to perform a line feed after a carriage return control command. Tray Renumber Assign Tray [x] Assign Manual Paper Assign Manual Envelope Configure the printer to work with a different print driver or custom application that uses a different set of source assignments to request a given paper source. Tray Renumber View Factory Defaults Show the factory default value assigned for each paper source. Note: An asterisk (*) next to a value indicates the factory default setting.