Lexmark XC4342 Users Guide - Page 21
Attaching cables, CAUTION-SHOCK HAZARD, CAUTION-POTENTIAL INJURY, Warning-Potential Damage
View all Lexmark XC4342 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Set up, install, and configure 21 1 Top 229 mm (9 in.) 2 Rear 101.6 mm (4 in.) 3 Right side 178 mm (7 in.) 4 Front 508 mm (20 in.) 5 Left side 127 mm (5 in.) Attaching cables CAUTION-SHOCK HAZARD: To avoid the risk of electrical shock, do not set up this product or make any electrical or cabling connections, such as the power cord, fax feature, or telephone, during a lightning storm. CAUTION-POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible. CAUTION-POTENTIAL INJURY: To avoid the risk of fire or electrical shock, use only the power cord provided with this product or the manufacturer's authorized replacement. CAUTION-POTENTIAL INJURY: To reduce the risk of fire, use only a 26 AWG or larger telecommunications (RJ-11) cord when connecting this product to the public switched telephone network. For users in Australia, the cord must be approved by the Australian Communications and Media Authority. Warning-Potential Damage: To avoid loss of data or printer malfunction, do not touch the USB cable, any wireless network adapter, or the printer in the areas shown while actively printing. Printer port 1 Power cord socket 2 LINE port Note: Available only in some printer models. Function Connect the printer to a properly grounded electrical outlet. Connect the printer to an active telephone line through a standard wall jack (RJ‑11), DSL filter, or VoIP adapter, or any other adapter that allows you to access the telephone line to send and receive faxes.