Lexmark XC4342 Users Guide - Page 179
Compatibility, Wireless Security Mode, WEP Authentication Mode, Set WEP Key, WPA2/WPA Personal
View all Lexmark XC4342 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
Use printer menus Menu item Compatibility 802.11b/g/n (2.4GHz)* 802.11a/b/g/n/ac (2.4GHz/5GHz) 802.11a/n/ac (5GHz) Wireless Security Mode Disabled* WEP WPA2/WPA-Personal WPA2-Personal 802.1x - RADIUS WEP Authentication Mode Auto* Open Shared Set WEP Key WPA2/WPA Personal AES Set Pre‑Shared Key WPA2-Personal AES 802.1x Encryption Mode WPA+ WPA2* IPv4 Enable DHCP On* Off Set Static IP Address IP Address Netmask Gateway 179 Description Specify the standard for the Wi‑Fi network. Note: 802.11a/b/g/n/ac (2.4GHz/5GHz) and 802.11a/n/ac (5GHz) only appear when a Wi‑Fi option is installed. Set the security mode for connecting the printer to Wi‑Fi devices. Set the type of Wireless Encryption Protocol (WEP) for the printer. Note: This menu item appears only when the Wireless Security Mode is set to WEP. Specify a WEP password for secure Wi‑Fi connection. Enable Wi‑Fi security through Wi-Fi Protected Access (WPA). Note: This menu item appears only when the Wireless Security Mode is set to WPA2/WPA-Personal. Set the password for secure Wi‑Fi connection. Enable Wi‑Fi security through WPA2. Note: This menu item appears only when the Wireless Security Mode is set to WPA2-Personal. Enable Wi‑Fi security through 802.1x standard. Note: This menu item appears only when the Wireless Security Mode is set to 802.1x - RADIUS. Enable and configure IPv4 settings in the printer.