Lexmark XC4342 Users Guide - Page 260

Troubleshoot a problem Error codes 31.64 31.80 32.40, 32.41, 32.42, 32.43 32.60 32.64 33.40, 33.41, 33.42, 33.43 33.60 33.64 37.1 37.3 260 Error message Solution Reinstall missing, unplugged, or unresponsive color imaging kit. 1 Open door B. 2 Remove the waste toner bottle. Note: To avoid spilling the toner, place the bottle in an upright position. 3 Remove the cartridges. 4 Disconnect the imaging kit cable. 5 Remove the imaging kit. 6 Insert the imaging kit. 7 Connect the imaging kit cable. 8 Insert the cartridges. 9 Insert the waste toner bottle. 10 Close door B. Reinstall missing or unresponsive fuser. 1 Open door A, and then open door A1. 2 Remove the fuser. 3 Insert the fuser. 4 Close door A1, and then close door A. Replace unsupported [color] See "Replacing a toner cartridge" on cartridge. page 204. Replace unsupported black See "Replacing the black imaging imaging unit. unit" on page 207. Replace unsupported color See "Replacing the color imaging kit" imaging kit. on page 216. Non-Lexmark [color] cartridge, seeUser's Guide. See "Non‑Lexmark supply" on page 307. Non-Lexmark black imaging unit, seeUser's Guide. Non-Lexmark color imaging kit, see User's Guide. Insufficient memory to collate job. Try one or more of the following: • Touch Continue to print the part of the job that is stored and to begin collating the rest of the print job. • Cancel the current print job. Insufficient memory, some Touch Continue to clear the message held jobs were deleted. and continue printing.