Lexmark XC4342 Users Guide - Page 24
Setting up Scan Center, Creating a shortcut, Setting up Card Copy, Scan Center, Notes, Shortcut Center
View all Lexmark XC4342 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Set up, install, and configure 24 Application Display Customization Customer Support Device Quotas Printer models CX730, CX735, XC4342, XC4352 XC4342, XC4352 XC4342, XC4352 Setting up Scan Center 1 From the home screen, touch Scan Center. 2 Select and create a destination, and then configure the settings. Notes: • When creating a network destination, make sure to validate and adjust the settings until no errors occur. • Only destinations created from the Embedded Web Server are saved. For more information, see the documentation that came with the solution. 3 Apply the changes. Creating a shortcut 1 From the home screen, touch Shortcut Center. Note: The icon and name may have been changed. For more information, contact your administrator. 2 Select a printer function, and then touch Create Shortcut. Note: The Secure E‑mail function is not supported. 3 Configure the settings, and then touch Save. 4 Type a unique shortcut name. Note: To avoid clipped names on the home screen, type only up to 25 characters. 5 Touch OK. The application automatically generates a unique shortcut number. Note: To launch the shortcut, touch , touch #, and then enter the shortcut number. Setting up Card Copy 1 Open a web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the web page correctly. 2 Click Apps > Card Copy > Configure.