Logitech 915-000030 User Manual - Page 21
Assigning your devices, 3 Testing your remote after you have set up your RF System
UPC - 097855054531
View all Logitech 915-000030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
2 Assigning your devices You can control your devices with either your Harmony remote or your RF System. Typically, you use the Harmony remote to control devices with which you have a clear line-of-sight, and you use the RF System to control devices that are in a closed cabinet or that span different rooms. For example, you would likely use your Harmony remote to control the TV because it is out in the open, but you would use your RF System to control the AV receiver and the DVD player, which are tucked away inside a cabinet. During initial set up, your remote will walk you through the steps to assign devices to your Harmony remote or RF System. Device Assignment 1/2 pages 7:15 Select devices you want to be controlled by your RF system Cancel e Done 3 Testing your remote after you have set up your RF System Your remote will walk you through steps to test your system after you have set up your RF System. If your Blasters aren't placed properly or you have not assigned your devices correctly, yoTuersrteamnodtet'essstcraegeaninwill walk you through steps to correct any issues you may be haBveinfogr.e you being the test, make sure all of your devices are off. If you have closed cabinet, you should also perform this test with the doors closed. 21