Magellan Maestro 3100 Manual - English - Page 62

Magellan CrossoverGPS Photo Manager The Magellan CrossoverGPS Photo Manager enables you to transfer image files in multiple formats from your computer to an optional memory card installed in your Magellan CrossoverGPS. The number of images you can load depends on the size of the card. Insert the memory card into the memory card slot. Turn on your Magellan CrossoverGPS by pressing and holding the Power button for approximately 2-3 seconds (Ten seconds if the Magellan CrossoverGPS is not in sleep mode.) When the Warning screen appears, insert the small end of the USB cable into the USB port on your Magellan CrossoverGPS, and the large end into an available USB port on your computer. Launch the Magellan CrossoverGPS Tools application. From the Magellan CrossoverGPS Tools screen, click on Photo. The left side of the window shows the contents of your computer and the right side of the window shows the contents of the memory card installed in your Magellan CrossoverGPS. Locate the image files you wish to load. When you have selected a file, the Transfer arrow will turn green. Click on the Transfer arrow to copy the file(s) to the memory card.In the same way, if you have loaded image files onto a memory card from another computer, you can copy the files from the card to your computer. When you have finished copying files, remove the USB cable from the Magellan CrossoverGPS. Magellan CrossoverGPS Photo Manager 53