Magnavox 50ML6200D User Manual - Page 29

Connect Accessory Devices 1 Set Top Box to TV Pb Y R VIDEO HDMI CABLE/ ANTENNA Using HDMI A Connect RF cable from wall to input at back of the cable box. B Connect cable box to TV using HDMI cable. Note: If the accessory device has DVI output only, use a DVI to HDMI adapter cable to connect to the HDMI connector. You need to also connect the audio cable to L and R AUDIO jacks. Next, go to Menu=>Setup=>Source=>Analog Audio In=> and select HDMI. C Press AV button to select HDMI external channel. Using RF Cable A Connect RF cable from wall to input at the back of the cable box. B Use second RF cable to connect the cable box to the TV's antenna input. This connection gives mono sound. For stereo sound use also composite audio/video connection (Refer to panel 3). Set output switch on set-top box to CH 3 or 4 (if available) and tune TV to the same channel as the set top box channel. In some cases, cable box will automatically tune to channel 3 or 4. Just change channels on the set top box to view the program. 2 DVD Player or DVD Recorder to TV Using HDMI Pb Y R VIDEO HDMI CABLE/ ANTENNA A Connect DVD player/DVD recorder to the TV using HDMI cable. B Turn on TV and DVD Player/DVD recorder. Press AV button on remote control to tune to the video supplied by HDMI. Insert a prerecorded DVD into DVD player/DVD recorder and press PLAY to verify correct connection. 3 DVD Player or DVD Recorder to TV Using Component Video Input (YPbPr) A Insert Component Video connectors into their corresponding jacks on both DVD player/DVD recorder and TV (Y, Pb and Pr). B Connect red/white audio cables into the audio output jacks on DVD player/ DVD recorder and audio AV inputs on TV. C Turn on TV and DVD player/DVD recorder. Press AV on remote control until the connected source appears on TV screen. Insert a pre-recorded DVD into DVD player/DVD recorder and press PLAY to verify correct connection. COMP VIDEO Y Pb Pr S-VIDEO OUT VIDEO OUT AUDIO R OUT L 21