Magnavox NB500MGX Owners Manual - Page 37

Audio

Page 37 highlights

INTRODUCTION CONNECTIONS PLAYBACK FUNCTION SETUP S Audio FUNCTION SETUP Audio BD Audio Mode HDMI Audio Out Down Sampling DRC Mix Audio Output HDMI Multi(Normal) On Off • To select the setting items and options, refer to " Custom" on page 31. • " Quick" menu consists of the setting menus frequently used, and they are accompanied with . Setting items Options BD Audio Mode Mix Audio Output*: For BD, selects whether to output the Outputs the secondary and interactive audio with primary audio if it is available. secondary and interactive audio with primary audio if it is available or only HD Audio Output: the primary audio. Refer to "Setting Outputs only the primary audio. Set this mode in order to output Dolby Digital, the BD Audio Mode" on page 29. Dolby Digital Plus, Dolby TrueHD, DTS or DTS-HD audio of BD through HDMI connection. HDMI Audio Out Sets the audio format for the audio output from HDMI OUT jack. Refer to page 36. HDMI Multi(Normal)*: The multi-channel audio signals are output from HDMI OUT jack with bitstream or LPCM. HDMI Multi(LPCM): The multi-channel audio signals are output from HDMI OUT jack with LPCM. Refer to pages 38-39 for setting options. Audio Mute: Mutes the HDMI audio signal, and set the signal format from DIGITAL OUT jack. Refer to "Digital Out setting" on page 37 for setting options. Down Sampling Sets the digital audio output when playing back BD or DVD recorded in LPCM. On*: LPCM signals are converted to 48 kHz for output. Set to "On" when using digital connections to an AV amplifier that is not compatible with sampling frequencies of 96 kHz. Off: For BD and DVD recorded in LPCM without copyright protection, 2-channel audio signals up to 192 kHz are output as LPCM signals with no conversion. DRC On Sets whether to compress the range of sound volume (dynamic range Off* control) when Dolby Digital, Dolby Digital Plus or Dolby TrueHD audio is played back. *)Settings with (*) are the default. • Under following circumstances, "HDMI Multi(Normal)" and "HDMI Multi(LPCM)" are not available. - HDMI cable is not connected to HDMI OUT jack. - Connected TV is off. - Connected TV is not compatible with audio output. OTHERS EN 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50

35
EN
FUNCTION SETUP
S
Audio
To select the setting items and options, refer to “
Custom” on page 31.
•“
Quick”
menu consists of the setting menus frequently used, and they are accompanied with
.
*)Settings with (*) are the default.
Under following circumstances, “HDMI Multi(Normal)” and “HDMI Multi(LPCM)” are not available.
-
HDMI cable is not connected to HDMI OUT jack.
-
Connected TV is off.
-
Connected TV is not compatible with audio output.
Setting items
Options
BD Audio Mode
For BD, selects whether to output the
secondary and interactive audio with
primary audio if it is available or only
the primary audio. Refer to “Setting
the BD Audio Mode” on page 29.
Mix Audio Output*:
Outputs the secondary and interactive audio with primary audio if it is available.
HD Audio Output:
Outputs only the primary audio. Set this mode in order to output Dolby Digital,
Dolby Digital Plus, Dolby TrueHD, DTS or DTS-HD audio of BD through HDMI
connection.
HDMI Audio Out
Sets the audio format for the
audio output from HDMI OUT jack.
Refer to page 36.
HDMI Multi(Normal)*:
The multi-channel audio signals are output from HDMI OUT jack with bitstream
or LPCM.
HDMI Multi(LPCM):
The multi-channel audio signals are output from HDMI OUT jack with LPCM.
Refer to pages 38-39 for setting options.
Audio Mute:
Mutes the HDMI audio signal, and set the signal format from DIGITAL OUT jack.
Refer to “Digital Out setting” on page 37 for setting options.
Down Sampling
Sets the digital audio output when
playing back BD or DVD recorded in
LPCM.
On*:
LPCM signals are converted to 48 kHz for output.
Set to “On” when using digital connections to an AV amplifier that is not
compatible with sampling frequencies of 96 kHz.
Off:
For BD and DVD recorded in LPCM without copyright protection, 2-channel
audio signals up to 192 kHz are output as LPCM signals with no conversion.
DRC
Sets whether to compress the range
of sound volume (dynamic range
control) when Dolby Digital, Dolby
Digital Plus or Dolby TrueHD audio is
played back.
On
Off*
Audio
BD Audio Mode
HDMI Audio Out
Down Sampling
DRC
Mix Audio Output
HDMI Multi(Normal)
On
Off
I
NTRODUCTION
C
ONNECTIONS
P
LAYBACK
FUNCTION SETUP
O
THERS