Magnavox NB500MGX Owners Manual - Page 49
Maintenance - user manual
View all Magnavox NB500MGX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
INTRODUCTION CONNECTIONS OTHERS Maintenance Servicing • Please refer to relevant topics on "Troubleshooting" on page 43 before returning the product. • If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power plug, and please contact 1-800-605-8610 or visit : http://www.magnavox.com/support Cleaning the cabinet • Wipe the front panel and other exterior surfaces of the unit with a soft, slightly damp cloth. • Never use a solvent, thinner, benzene or alcohol to clean the unit. Do not spray insecticide liquid near the unit. Such chemicals may discolor the surface or damage the unit. Cleaning discs • When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a circular motion. • Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analog records. Cleaning the disc lens • If this unit still does not perform properly although you refer to the relevant sections and to "Troubleshooting" in this user manual, the laser optical pickup unit may be dirty. Consult your dealer or an authorized service center for inspection and cleaning of the laser optical pickup unit. Disc handling • Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs. • Always store the disc in its protective case when it is not used. • Note that discs with special shapes (heart-shaped discs, octagonal discs, etc.) cannot be played back on this unit. Do not attempt to playback such discs, as they may damage the unit. IR signal check • If the remote control is not working properly, you can use an AM radio or digital camera (including a cellular phone with built-in camera) to see if it is sending out an infrared signal. • With an AM radio: Tune the AM radio to a nonbroadcasting frequency. Point the remote control towards it, push any button and listen. If the sound from the radio flutters, it is receiving the remote control's infrared signal. • With a digital camera (including built-in cell phone cameras): Point a digital camera towards the remote control. Push any button on the remote control and look through the digital camera. If the infrared light appears through the camera, the remote control is working. PLAYBACK FUNCTION SETUP OTHERS EN 47