Marantz SR9600 SR9600 User Guide

Marantz SR9600 Manual

Get Marantz SR9600 PDF manuals and user guides View all Marantz SR9600 manuals
Add to My Manuals
Save this manual to your list of manuals

Marantz SR9600 manual content summary:

  • Marantz SR9600 | SR9600 User Guide - Page 1
    Model SR9600 User Guide AV Surround Receiver
  • Marantz SR9600 | SR9600 User Guide - Page 2
    important operating and maintenance (servicing) instructions in the literature accompanying the which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. NOTE: electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked
  • Marantz SR9600 | SR9600 User Guide - Page 3
    manual thoroughly before you connect and operate the SR9600. As there are a number of connection and configuration options, you are encouraged to discuss your own particular home theater setup with your Marantz A/V specialist dealer. NAMES AND FUNCTIONS 10 LOADING BATTERIES 10 REMOTE-CONTROLLABLE
  • Marantz SR9600 | SR9600 User Guide - Page 4
    "boomy". THX Ultra2 receivers contain the BGC (Boundary Gain Compensation) feature to provide an improved bass balance. BGC can be selected by choosing "THX Ultra2 Subwoofer-Yes" from the "Boundary Gain Compensation" section of the "THX Audio setup menu". THX Surround EX-Dolby DIgital Surround EX
  • Marantz SR9600 | SR9600 User Guide - Page 5
    appeared, it became possible to deliver 24-bit, 96 kHz audio into the home, but surround experience to automotive sound. While conventional surround programming is fully compatible with Dolby Surround Pro Logic II decoders, soundtracks will be able to be encoded specifically speaker drivers are
  • Marantz SR9600 | SR9600 User Guide - Page 6
    . To play back DVD-Audio or Super Audio CDs using i.LINK, the connected device must support DTCP. Before connecting a component to this receiver, refer to its instruction manual. • HDMI HDMI (High-Definition Multimedia Interface) is an enhancement to the DVI (Digital Visual Interface) standard. It
  • Marantz SR9600 | SR9600 User Guide - Page 7
    • 4 emitter outputs • Learning remote control • Flasher input, IR receiver input • Graphic display, 256 x 64 pixel • Transmit/receive remote control system • Copper plate chassis ACCESSORIES Remote control unit RC3200B AM loop antenna × 2 VOL OK CH S Ex M Microphone MC-10 AC cable AA-size
  • Marantz SR9600 | SR9600 User Guide - Page 8
    !3 AV SURROUND RECEIVER SR9600 u SR9600's output through a pair of headphones. Be certain that the headphones have a standard 1/4" stereo phono control knob Adjusts the overall sound level. Turning the control clockwise increases the sound level. !6 AUX1 INPUT jacks These auxiliary audio/video input
  • Marantz SR9600 | SR9600 User Guide - Page 9
    (MC-10). (See page 36) @5 SPEAKER A/B button Press this button to select speaker system A and/or B. @6 INFRARED receiver window This window receives infrared signals for the remote control unit. @7 INFRARED transmitter window This window transmits infrared signals for the remote control unit
  • Marantz SR9600 | SR9600 User Guide - Page 10
    FRONT A OR B, CENTER, SURR, SURR BACK : MINIMUM 6 OHMS FRONT A AND B : MINIMUM 8 OHMS COAX 1 3 1 3 IR FLASHER RECEIVER IN IN IN MODEL NO. SR9600 UNSWITCHED 1A 120W MAX AC IN DIGITAL OUT USB AUDIO RS232C 2 4 2 4 DC OUT EMITTER OUT OUT RC-5 MULTI RC AC 120V 60HZ AC OUTLETS
  • Marantz SR9600 | SR9600 User Guide - Page 11
    control the operation of the SR9600 using an external device. The RS232C port may also be used in the future to update the operating software of the SR9600 so that it will be able to support new digital audio formats and other feature as they are introduced. @5 HDMI INPUT/OUTPUT This unit has 2 HDMI
  • Marantz SR9600 | SR9600 User Guide - Page 12
    unit and the infrared sensor of the SR9600 should be less than about 16.4 ft (5 meters). If the transmitter/receiver is pointed away from the infrared sensor or if there is an obstacle between them, remote control may not be possible. 60° Remote control unit (RC3200B) A1p6p.r4oxft. (5 m) 10
  • Marantz SR9600 | SR9600 User Guide - Page 13
    top of the LCD touch screen. Note: • You can operate the soft buttons in the same way as you would operate hard buttons on a conventional remote control. If you keep the soft button pressed instead of tapping it, the RC3200B keeps sending the IR command. 11
  • Marantz SR9600 | SR9600 User Guide - Page 14
    are used to change the input source. Power on and off These buttons are used to turn the SR9600 on or off. AUTO, Stereo, M-Stereo, S-Direct, P-Direct, THX mode, 2EX/dts ES , Virtual, Mode These buttons are used to select the surround mode. (see page 49) SURROUND MODE 2 (PAGE 3/8) wed Jun 01
  • Marantz SR9600 | SR9600 User Guide - Page 15
    DSS, CD-R, VCR2, LD, TAPE, AUX1, AUX2 These buttons are used for selecting an input source. Tuner 1 FM and AM These buttons are used to switch between the FM and are used to turn the four DC trigger outputs on and off. Trigger control must first be set on the OSD menu system. (see page 45) Note:
  • Marantz SR9600 | SR9600 User Guide - Page 16
    button is used to start scaning automatically through preset stations in the receiver's memory. Frequency Direct This button is used to jump to the page 1 - 9) These buttons are used to change the preset station name or input a frequency directly. CLR (Clear) This button is used to cancel certain
  • Marantz SR9600 | SR9600 User Guide - Page 17
    scaning automatically through preset stations in the receiver's memory. Info. This button is Power on and off These buttons are used to turn the SR9600 on or off. TUNER 1/2 : KEY/RDS (PAGE 2/2) are used to change the preset station name or input a frequency directly. Memo This button is used to
  • Marantz SR9600 | SR9600 User Guide - Page 18
    screen appears. ¥ MACRO ¥ -- MACRO -- 10. Tap the soft or hard buttons of the THE SR9600 STATUS ON THE RC3200B The RC3200B communication with the SR9600 is capable of two-way, It can display the status of the SR9600. surround mode, format and channel status of the input signal, in the main room. 16
  • Marantz SR9600 | SR9600 User Guide - Page 19
    Setup mode: For changing the RC3200B system settings. See "ADJUSTING THE SETTEING" for more details. Learn mode: For learning commands from other remote controls you first have to select a specific device to perform these actions. or "-" to adjust the timeout in 10 second increments up or down. Adjust
  • Marantz SR9600 | SR9600 User Guide - Page 20
    commands to the RC3200B. 1. Tap the Revert. A message screen appears, asking you to confirm or cancel the revert process. 2. Press OK or Cancel. TO EXIT SETUP MODE 1. Press the Mode button. The Mode screen appears. 2. Tap the Mode you want to go to. The RC3200B switches to this mode. See also
  • Marantz SR9600 | SR9600 User Guide - Page 21
    receives an IR code: • A confirmation beep will sound. • The label changes from "LEARNING" to "OK". The learn sequence is successful. OK 1/4 DVD Main H M S Ex O K H M Side View DVD remote control unit Side View DVD remote RC3200B control unit RC3200B Done BWD FWD 1 - 4 inchs (2.5 - 10
  • Marantz SR9600 | SR9600 User Guide - Page 22
    SETUP If you want to personalize your RC3200B even more beyond its standard programming features, RC3200Setup is the tool to use. You can find more information and updates to the software at "http://www.marantz extended help system by • download new configurations a diluted window-cleaning solution.
  • Marantz SR9600 | SR9600 User Guide - Page 23
    Surround left and right speakers, and surroundDIGITAL OUT back speaker USB AUDIO Y CB/PB CR/PR Y CB/PB CR/PR Y CB/PB CR/PR Y CB/PB CR/PR OUTPUT-2 1 3 1 3 PASSIVE SUB2 WO4 O2FER4 RS232C DC OUT EMITTER OUT IR FLASHER RECEIVER IN IN IN OUT RC-5 MULTI RC MODEL NO. SR9600
  • Marantz SR9600 | SR9600 User Guide - Page 24
    OHMS COAX 1 3 1 3 IR FLASHER RECEIVER IN IN IN MODEL NO. SR9600 UNSWITCHED 1A 120W MAX AC IN DIGITAL OUT USB AUDIO RS232C 2 4 2 4 DC OUT Be sure to connect inputs and outputs properly. • Refer to the instructions for each component that is connected to the SR9600. • Do not
  • Marantz SR9600 | SR9600 User Guide - Page 25
    GND FM(75Ω) CLASS 2 WIRING LEFT SURR. RIGHT HDMI 8 Ver 1.1 INPUT-1 (DVD) INPUT-2 (DSS) OUTPUT Y CB/PB CR/PR OUTPUT-1 INPUT-1 (DVD) INPUT-2 (DSS) INPUT-3 (VCR-1) INPUT-4 (VCR-2 / DVD-R) CLASS 2 WIRING the S-VIDEO or component jack on the SR9600, it is SURR. RIGHT not necessary to
  • Marantz SR9600 | SR9600 User Guide - Page 26
    view images in HDMI, it is necessary to connect to a display that supports HDCP. • There may be no image output if connected to a TV or display that is not compatible with the above format. • Refer to the instruction manual of the TV or display to be connected to the SR9600 for detailed information
  • Marantz SR9600 | SR9600 User Guide - Page 27
    OUT CD PLAYER EXTERNAL INTERNAL q You can control other Marantz products through the SR9600 with the remote control by connecting the REMOTE CONTROL terminals on each unit. The signal transmitted from the remote control is received by the remote sensor on the SR9600, then the signal is sent to the
  • Marantz SR9600 | SR9600 User Guide - Page 28
    HDMI 8 Ver 1.1 INPUT-1 (DVD) INPUT-2 (DSS) OUTPUT TUNER-2 Y CB/PB CR/PR OUTPUT-1 INPUT-1 (DVD) INPUT-2 (DSS) INPUT-3 (VCR-1) INPUT FLASHER RECEIVER IN IN IN MODEL NO. SR9600 UNSWITCHED 1A 120W MAX AC IN DIGITAL OUT USB AUDIO RS232C horizontally above a window or outside. Notes
  • Marantz SR9600 | SR9600 User Guide - Page 29
    7 HDMI 8 Ver 1.1 INPUT-1 (DVD) INPUT-2 (DSS) OUTPUT VIDEO Y CB/PB CR/PR OUTPUT-1 INPUT-1 (DVD) INPUT-2 (DSS) INPUT-3 (VCR-1) INPUT-4 ( COAX 1 3 1 3 IR FLASHER RECEIVER IN IN IN MODEL NO. SR9600 UNSWITCHED 1A 120W MAX AC IN DIGITAL OUT USB AUDIO RS232C 2 4 2 4 DC
  • Marantz SR9600 | SR9600 User Guide - Page 30
    than 3.5 m and that supports S400. • Some players require i.LINK setup. For details, see the instruction manual of the device. * Some devices may require you to make settings with the device connected to the SR9600 during the setup. • Audio signals input from the i.LINK connector are not output from
  • Marantz SR9600 | SR9600 User Guide - Page 31
    other device for servicing. (Use a straight cable for the connection.) IR RECEIVER IN This receiver can be operated by remote control without using the internal IR receiver, by connecting an external IR receiver. DC OUT (DC TRIGGER) External devices can be controlled from the SR9600 by connecting
  • Marantz SR9600 | SR9600 User Guide - Page 32
    > (1) With "1. INPUT SETUP" selected, press the remote control unit. When using the remote control unit, use the OK button as if it were the ENTER button. 30 RC3200B BUTTON CONTROL LEFT button OK button VOL OK CH S Ex M UP button RIGHT button DOWN button AV SURROUND RECEIVER SR9600 INPUT
  • Marantz SR9600 | SR9600 User Guide - Page 33
    /ENTER button. 1 . I NPUT SE T UP F UNC I NPUT SE T UP 7 . 1CH I NPUT S ET UP i . L I NK SET UP F UNCT I ON RE NA ME RET URN EX I T See "1. INPUT SETUP" ( p.32) 2 . SPKR SE T UP AUT O SET UP MANUA L SET UP T HX AUD I O SET U P BASS PEAK LEV E L SPKR A  B : A B RET URN EX I T See "2. SPKR
  • Marantz SR9600 | SR9600 User Guide - Page 34
    input jacks of this receiver. • FUNC INPUT SETUP : "1-1 FUNC INPUT SETUP" (see page 33) • 7.1 CH INPUT SETUP : "1-2 7.1 CH INPUT SETUP" (see page 33) • i.LINK SETUP : "1-3 i.LINK SETUP p.33 F UNC I NPUT S ET UP F U N C : M O D E D I G HDMI 1 COMP DVD : AUT O 2 LD : ANA 3 TV :D IG. 1 1 D S S :
  • Marantz SR9600 | SR9600 User Guide - Page 35
    used. ANA: Select "ANA" for input sources for which no digital input jacks are used. HDMI: Select "HDMI1" or "HDMI2". i.LINK: Select a number that can be set to i.LINK. "i.LINK" appears only when an i.LINK device has been assigned as an input source as explained in "i.LINK SETUP". (See page 34) DIG
  • Marantz SR9600 | SR9600 User Guide - Page 36
    component when it is selected by this receiver. ON: The play command is sent to the i.LINK component. (With some i.LINK components, it is necessary to set auto play on the component itself.) OFF: Play is manually controlled. 4. To select "AUTO INPUT SEL", press or cursor button. 5. Select "ON" or
  • Marantz SR9600 | SR9600 User Guide - Page 37
    page 36) • MANUAL SETUP: "2-2 MANUAL SETUP" (see page 37) • THX AUDIO SETUP: "2-3 THX AUDIO SETUP" (see page 39) • BASS PEAK LEVEL: "2-4 BASS PEAK LEVEL" (see page 40) Note: • These settings cannot be selected when "THX ULTRA2 SUB-W" has been set to "YES" in the THX AUDIO SETUP menu. Note: • After
  • Marantz SR9600 | SR9600 User Guide - Page 38
    on the monitor during setup, turn the monitor on. 1. Connect the included microphone to the MIC jack on the SR9600. AV SURROUND RECEIVER SR9600 INPUT SELECTOR VOLUME STANDBY POWER ON/STANDBY PHONES PURE DIRECT THX DOWN TUNING UP BAND F/P SURROUND MODE AUTO MULTI MULTI SPEAKER
  • Marantz SR9600 | SR9600 User Guide - Page 39
    AUT O SET U P 3 F I N I SH ! ! CHECK RESU LT SPEAKERS S IZE : OK D I ST ANCE : OK F LA T MOD E : OK F R O N T ɹM
  • Marantz SR9600 | SR9600 User Guide - Page 40
    proper sound space that the SR9600 and today's sound systems are able custom installations. Marantz recommends the www each speaker with the or cursor buttons. 10. Set the distance for each speaker , surround back speaker in the SPEAKER SIZE menu. 11. After you complete this portion of the setup
  • Marantz SR9600 | SR9600 User Guide - Page 41
    if it is set for one surround back speaker in the SPEAKER SIZE menu. • To adjust the speaker levels for 7.1 channel input sources, you will need to use the 7.1 Ch Input sub menu. (See page 33) • SUB W can be set from -18dB to +12dB. 2-3 THX AUDIO SETUP You can set the Boundary Gain Compensation
  • Marantz SR9600 | SR9600 User Guide - Page 42
    : Press the or button. "START" is displayed and a bass test tone is generated from the speaker which was designated for bass signal output during setup. There will be no audible sound yet because the master volume is set to minimum automatically. VOLUME LEVEL: Adjust the bass test tone output level
  • Marantz SR9600 | SR9600 User Guide - Page 43
    SURROUND SETUP This menu is for setting surround effect parameters for the various surround input : OFF : - 1 0 dB RET URN EX I T RE-EQ: Turns THX Cinema Re-EQ™ on and off. Select the Cinema Re-EQ™ with the or 10 dB" or "OFF" with or cursor button. After you complete this portion of the setup
  • Marantz SR9600 | SR9600 User Guide - Page 44
    input. (It also supports 5.1 channel input.) This mode expands the sound image from the center channel. 1. Select "3. SURROUND SETUP an exciting perspective. DIMENSION: Set the DIMENSION level between -3 and into the left and right speakers. This control may help achieve a more spacious sound or a
  • Marantz SR9600 | SR9600 User Guide - Page 45
    video components so that they can be powered up automatically and enter standby at the same time as the SR9600. Settings can be entered separately for each input source. 1. Select "4. VIDEO SETUP" from MAIN MENU with the or cursor buttons and press the OK/ENTER button. 2. Select "VIDEO AUTO ON" with
  • Marantz SR9600 | SR9600 User Guide - Page 46
    • MULTI ROOM SETUP : "5-1 MULTI ROOM SETUP" (see page 44) • DC TRIGGER SETUP : "5-2 DC TRIGGER SETUP" (see page 45 input to the HDMI jacks through the SR9600 or output it through the receiver to a TV or projector. ENABLE: The audio input to the HDMI jacks can be played back by this receiver
  • Marantz SR9600 | SR9600 User Guide - Page 47
    or cursor buttons and press the OK/ENTER button. 5-2 DC TRIGGER SETUP This unit has 4 DC trigger control jacks, which can be used to link with input functions for the main room or multiroom. Each trigger can be setup separately. 1. Select "5. PREFERENCE" from MAIN MENU with the or cursor buttons
  • Marantz SR9600 | SR9600 User Guide - Page 48
    (see page 47) EQ MODE: Set to one of the 4 equalizer modes, either from the manual modes (PRESET G. EQ 1/2) or the auto modes set by the MRAC mode (AUTO 1/2). Set with the or cursor buttons. After you complete this portion of the setup, move the cursor to "RETURN" with the , , and cursor buttons
  • Marantz SR9600 | SR9600 User Guide - Page 49
    6-1 PRESET G. EQ 1 & 2 ADJ These modes allow you to set a 9-band graphic equalizer for each of the 7 channels. 1. Select "6. ACOUSTIC EQ" from MAIN MENU with the or cursor buttons and press the OK/ENTER button. 2. Select "PRESET G. EQ 1 ADJ (or PRESET G. EQ 2 ADJ) "with the or cursor buttons. 3.
  • Marantz SR9600 | SR9600 User Guide - Page 50
    item specifically for the i.LINK device is added between "DVD" and "AUX2". It can be selected using the INPUT SELECTOR knob or via the Input button on the remote control unit. EXAMPLE: WHEN "DVxxxx" OR "SAxxxx" i.LINK DEVICE HAS BEEN NEWLY CONNECTED TO THE SR9600 1. AV SURROUND RECEIVER SR9600
  • Marantz SR9600 | SR9600 User Guide - Page 51
    THE MAIN VOLUME Using the SR9600 AV SURROUND RECEIVER SR9600 INPUT SELECTOR AV SURROUND RECEIVER SR9600 INPUT SELECTOR VOLUME STANDBY POWER ON/STANDBY PHONES PURE DIRECT THX DOWN TUNING UP BAND PURE DIRECT THX DOWN TUNING UP BAND F/P F/P DOWN SURROUND MODE AUTO MULTI MULTI
  • Marantz SR9600 | SR9600 User Guide - Page 52
    signal with respect to the image signal output from the SR9600 to correct the time lag between the sound and image. 1. Tap the A/V Amp and press the page up button until page 5/8 is displayed. Tap the "LSync" on the remote control unit. wed Jun 01 4:40pm 5/8 A/V Amp Mode 1. 2. Select the time
  • Marantz SR9600 | SR9600 User Guide - Page 53
    5.1 channel source whenever THX is active. THX Surround EX is not available in system without surround back speaker(s). Note: • When playing Dolby Digital Surround EXencoded software in 6.1 channels, it is required to select the THX Surround EX mode. THX ULTRA2 CINEMA THX Ultra2 Cinema mode plays
  • Marantz SR9600 | SR9600 User Guide - Page 54
    surround mode, you cannot switch to digital input or from digital input to analog input from the INPUT SETUP in the MAIN MENU or by pressing the A/D button. • You can not listen to DTS-encoded software For details, refer to the player's operation manual. • Some DVD discs feature copy protection.
  • Marantz SR9600 | SR9600 User Guide - Page 55
    the input signal The surround mode is selected with the surround mode selector on the SR9600 or the remote control unit. However, the sound you hear is subject to the relationship between the selected surround mode and the input signal. That relationship is as follows: Surround Mode Input Signal
  • Marantz SR9600 | SR9600 User Guide - Page 56
    ENGLISH Surround Mode Virtual Multi Ch. Stereo Dolby H.P THX (THX Games) THX Ultra2 (THX EX) (THX Music) (THX Games) Input Signal Dolby Surr.EX Dolby D (5.1ch) Dolby D (2ch) Dolby D (2ch Surr) DTS-ES DTS 96/24 DTS (5.1ch) Multi Ch-PCM SA-CD (5.1ch) SA-
  • Marantz SR9600 | SR9600 User Guide - Page 57
    ATT on the remote control unit. The "ATT" indicator is illuminated when this function is activated. The signal input level is reduced phono plug. (Note that the speakers will automatically be turned off when the headphone jack is in use.) AV SURROUND RECEIVER SR9600 INPUT SELECTOR PURE DIRECT THX
  • Marantz SR9600 | SR9600 User Guide - Page 58
    on page 1/8 on the remote control unit. The input source is now selected and you may watch or listen to it as desired. 1. AV SURROUND RECEIVER SR9600 wed Jun 01 4:40pm 1/8 A/V Amp Source Select INPUT SELECTOR VOLUME STANDBY POWER ON/STANDBY PHONES PURE DIRECT THX DOWN TUNING UP BAND
  • Marantz SR9600 | SR9600 User Guide - Page 59
    is displayed. Tap the AUX2 on the remote control unit. 1. AV SURROUND RECEIVER SR9600 INPUT SELECTOR wed Jun 01 4:40pm 1/8 A/V Amp Source Select VOLUME PURE DIRECT THX DOWN TUNING UP BAND F/P DOWN UP channel analog input. SURROUND MODE AUTO MULTI MULTI SPEAKER AUTO TUNE T-MODE
  • Marantz SR9600 | SR9600 User Guide - Page 60
    Tuner 1 Tuner 1 : Main 1. wed Jun 01 4:40pm 2/2 Tuner 1 Tuner 1 : Key/RDS AV SURROUND RECEIVER SR9600 INPUT SELECTOR 3. 2. STANDBY POWER ON/STANDBY PHONES PURE DIRECT THX DOWN TUNING UP BAND F/P SURROUND MODE AUTO MULTI MULTI SPEAKER AUTO TUNE T-MODE MEMORY CLEAR PURE
  • Marantz SR9600 | SR9600 User Guide - Page 61
    PRESET MEMORY MANUAL PRESET MEMORY RECALLING A PRESET STATION You can preset up to 50 AM/FM stations in any order. This memory is shared by both tuners 1 and 2. AV SURROUND RECEIVER SR9600 For each station, you can memorize the frequency and reception mode if desired. INPUT SELECTOR AUTO
  • Marantz SR9600 | SR9600 User Guide - Page 62
    the remote control unit. 4. "xx CLEAR" appears on the display to indicate that the specified preset number has been cleared. Note: • To clear all stored preset stations, press and hold the CLEAR and the F/P buttons for two seconds. SORTING PRESET STATIONS AV SURROUND RECEIVER SR9600 INPUT SELECTOR
  • Marantz SR9600 | SR9600 User Guide - Page 63
    SPEAKER OPERATION FROM THE REMOTE CONTROL UNIT wed Jun 01 4:40pm 1/6 Multi room A MULTI-ROOM A wed Jun 01 4:40pm 2/6 Multi room A MULTI-A : Source 2. 3. 2. AV SURROUND RECEIVER SR9600 INPUT SELECTOR VOLUME STANDBY POWER ON/STANDBY PHONES PURE DIRECT THX DOWN TUNING UP BAND
  • Marantz SR9600 | SR9600 User Guide - Page 64
    input signals are not supported. • If the Tuner 1 (AM or FM) is active in the main room, you can not control any function of Tuner 1 from multiroom A or B. However, Tuner 2 can be controlled main room. The remote control units of other Marantz products can also be used to control multiroom A. M U
  • Marantz SR9600 | SR9600 User Guide - Page 65
    Marantz Service Center in your country. SYMPTOM CAUSE REMEDY The SR9600 cannot be turned on. The power plug is not connected. Connect the power plug to the outlet. No sound and picture are Mute is on. Cancel mute using the remote control unit. output even when power is on. The input cable
  • Marantz SR9600 | SR9600 User Guide - Page 66
    that supports DTCP. The i.LINK mode on the SR9600 is not correctly set. Set i.LINK input on the SETUP menu as explained on page 34. The i.LINK output of the source Set i.LINK output so that it turns on, as component (DVD, etc.) is not on. explained in the source component instruction manual
  • Marantz SR9600 | SR9600 User Guide - Page 67
    Remote Control Unit RC3200B 1 Microphone MC-10 1 AA-size Batteries 3 FM Antenna 2 FM Antenna Adaptor 2 AM Loop Antenna 2 Front AUX Jack Cover 1 AC cable 1 RS232C Cable 1 Specifications subject to change without prior notice. DIMENSIONS 17-5/16 ins. (440 mm) AV SURROUND RECEIVER SR9600
  • Marantz SR9600 | SR9600 User Guide - Page 68
    or dealer on our website. U.S.A. EUROPE Marantz America, Inc. Marantz Europe B.V. 1100 Maplewood Drive, Itasca, IL 60143, U.S.A. P.O. Box 8744, 5605 LS Eindhoven, The Netherlands Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", "Surround EX" and the double-D symbol are
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
Model SR9600 User Guide
AV Surround Receiver