Maytag MBL2256KES Use and Care Guide - Page 10
Connecting, the Water Supply
UPC - 719881174099
View all Maytag MBL2256KES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Installation Connecting the Water Supply ([select models) Materials Needed: • '/4"outer diameter flexible copper tubing • Shut-off valve (requires a '/4" hole to be drilled into water supply line before valve attachment) • Adjustable wrench (2) • '/_" hex nut driver Notes: • Use copper tubing only for installation. Plastic is less durable and can cause damage. • Add 8' to tubing length needed to reach water supply for creation of service loop. . Create service loop with copper tubing (minimum 2' diameter). Avoid kinks in the copper tubing when bending the service loop. Do not use plastic tubing. 2' diameter minimum . Remove plastic cap from water valve inlet port. . Place brass nut (A) and sleeve (B) on copper tube end as illustrated. Reminder: Do not use an old sleeve. The nut and sleeve are provided in the Use and Care packet. . Place end of copper tubing into water valve inlet port. Shape tubing slightly. Do not kink - so -B that tubing feeds straight into inlet port.