Maytag MBL2256KES Use and Care Guide - Page 26

Replacing Light Bulbs

Page 26 highlights

andCleaning Replacing Light Bulbs Fresh Food Section Cstyle of light shield varies) 1. Slide clear light shield toward back of compartment to release from light assembly. 2. Remove light bulbs. 3. Replace with appliance bulbs no greater than 40 watts. . Replace light bulb cover by inserting tabs on light shield into liner holes on each side of light assembly. Slide shield toward front of refrigerator until it locks into place. Do not force shield beyond locking point. Doing so may damage light shield. Freezer Cstyle of light shield varies) 1. Reach behind the light cover. With firm pressure, press forward on the notches at the back of the cover and pull down. The cover will open from the back. 3. Remove the cover. . Remove light bulb. 5. Replace bulb with appliance bulb no greater than 40 watts. Insert front tabs of light cover into slots in freezer liner and snap rear portion over light assembly until rear tab engages. 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104

andCleaning
Replacing Light Bulbs
Fresh Food Section
Cstyle
of light shield varies)
1. Slide clear
light
shield toward
back of compartment
to
release from
light
assembly.
2. Remove
light
bulbs.
3. Replace
with
appliance
bulbs
no
greater
than
40
watts.
.
Replace
light
bulb cover
by inserting
tabs on light
shield
into liner
holes on each side of light
assembly. Slide shield
toward
front
of refrigerator
until
it locks
into place.
Do not
force shield
beyond
locking
point.
Doing so may damage
light shield.
Freezer
Cstyle
of
light
shield
varies)
1. Reach behind
the light
cover.
With firm
pressure,
press
forward
on the notches
at
the back
of the cover and
pull down.
The cover will
open from
the back.
3. Remove
the cover.
.
5.
Remove
light
bulb.
Replace
bulb with
appliance
bulb no
greater
than
40
watts.
Insert front
tabs of light
cover
into slots
in freezer
liner and snap rear
portion
over light
assembly
until
rear tab
engages.
25