Maytag MER5775RAB Installation Manual - Page 1
Maytag MER5775RAB - Ceramic Range Manual
View all Maytag MER5775RAB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
INSTALLER: IN LEAVE THESE INSTRUCTIONS ON WITH THE APPLIANCE MANUAl Electric 30-inch Wide Free-stand" e PLEASE KEEP THIS MANUAL FOR FUTURE REFERENCE THE MANUAL IS INTENDED TO ASSIST IN THE INITIAL INSTALLATION AND ADJUSTMENTS OF THE RANGE. Only qualified personnel should install or service this range. Read "Safety Instructions" in Use & Care book before using range. Improper installation, adjustment, alteration, service, maintenance or use of range can result in serious injury or property damage. CAUTION: This range has been designed in accordance with the requirements of various safety agencies and complies with the maximum allowable wood cabinet temperatures of 194°F. tf this range is installed with cabinets that have a lower working temperature than 194°F, discoloration, delamination or melting may occur. ENGLISH ESPANOL FRAN(_AIS 0 PP. 1-7 0 pag. 8-14 i$ p. 15-21 CLEARANCE DIMENSIONS For complete information in regard to installation of freestanding range, see figures 1 and 2 on page 2. For SAFETY CONSIDERATIONS do not install a range in any combustible cabinetry which is not in accord with the installation clearances shown in figure 1. MOBILE HOMES The installation of a range designed for mobile home installation must conform with the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24 HUD, Part 280) or, when such standard is not applicable, the Standard for Manufactured Home Installations 1982 (Manufactured Home Sites, Communities and Set-Ups), ANSI A225.1-1atest edition, or with local codes. LOCATING THE RANGE Place range in a well lit area. Do not set range over holes in the floor or other locations where it may be subject to strong drafts. Any opening in the wall behind the range and in the floor under the range should be sealed. Make sure the flow of cooling/ventilation air is not obstructed below the range. 8101 P506-60 (06-03-00)