Maytag MHW9000YG Use & Care Guide - Page 6

ON-SCREEN OPTIONS AND SETTINGS Many of the settings and options for each cycle are included in the on-screen display, and can be selected or adjusted once you have selected the wash cycle with the cycle knob. NOTE: Not all options or settings are available with all cycles, and some may not be used together. To adjust settings, use the selection button beneath the desired option. If the screen shows the multiple page symbol , press the or button to display additional options. Then press the or button until the desired setting for that option is in the center of the display and press the center selection button to select. TEMPERATURE The recommended wash temperature is preset for each cycle. You may also select a wash temperature based on the type of fabric and soils being washed. For best results, use the warmest wash water safe for your fabric, following the garment label instructions. All wash temperatures feature a cold rinse, except Warm/Warm, which has a warm wash and a warm rinse. SOIL LEVEL Soil level is preset for each wash cycle. For most loads, use the soil level that is preset with the cycle you have chosen. Press the or button to adjust the Soil Level to the desired setting. Different Soil Level settings may increase or decrease the cycle time shown in the Estimated Time Remaining display. SPIN SPEED This washer automatically selects the spin speed based on the cycle selected. Preset speeds can be changed. n Faster spin speeds mean shorter dry times, but may increase wrinkling in your load. n Slower spin speeds reduce wrinkling, but will leave your load more damp. DELAY START Delay the start of the wash cycle up to 16 hours. PRETREAT Prewash Use Prewash with loads of heavily soiled items. Prewash will add additional time to the main cycle.  Autosoak Autosoak is helpful in removing small spots of set-in stains from fabrics. It tumbles the load briefly for even distribution, then provides an extended cold or warm water soak with minimal drum movement to help loosen tough stains. RINSE Normal Standard rinse is default on most cycles. See the "Cycle Guide" for available Wash/Rinse temperature options.  Extra Provides an extra rinse to thoroughly flush out bleach or allergens. Extra rinse is default on the Whites cycle and some Specialty Cycles. It can be added to most other cycles by selecting the Extra option. Ultra Ultra provides two additional rinses to a cycle. Ultra may be selected for all cycles located around the dial with the exception of Drain & Spin and Clean Washer. It may also be added to the Stuffed Animals and Pillows Specialty Cycles. MAX EXTRACT™ Max Extract™ uses an extended high-speed spin to remove additional water during the spin. This helps reduce drying times. 6