Miele DGC 4084 XL ss Product Manual - Page 16

Setting the correct boiling point for water 16, Heating the appliance 16

Get Miele DGC 4084 XL ss PDF manuals and user guides View all Miele DGC 4084 XL ss manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Before using for the first time Setting the correct boiling point for water Run the Steam / Universal (212°F / 100°C) program for 15 minutes. Continue as described in the "Quick Guide" section. This procedure sets the correct boiling point for water for the altitude in your area and also flushes the waterlines. This procedure causes more steam than usual to be emitted from the appliance. If you move the appliance to a new location, it will need to be re-set for the new altitude if this differs from the old one by more than 984 ft. (300 m). To do this, run the descale program (see "Cleaning and care - Descale"). Heating the appliance To remove the protective grease from the heating element, heat the combi-steam oven with nothing in it to 400°F (200°C) using the ConvectionPlus program for 30 minutes. Continue as described in "Operation". There will be a slight smell the first time the heating element is heated. The smell and any vapors will dissipate after a short time, and do not indicate a faulty connection or appliance. It is important to ensure that the room is well ventilated during this process. 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
Setting the correct boiling point for water
Run the Steam / Universal (212°F / 100°C) program for
15 minutes. Continue as described in the "Quick Guide"
section.
This procedure sets the correct boiling point for water for the
altitude in your area and also flushes the waterlines.
This procedure causes more steam than usual to be emitted
from the appliance.
If you move the appliance to a new location, it will need to be
re-set for the new altitude if this differs from the old one by
more than 984 ft. (300 m). To do this, run the descale
program (see "Cleaning and care - Descale").
Heating the appliance
To remove the protective grease from the heating element,
heat the combi-steam oven with nothing in it to 400°F (200°C)
using the ConvectionPlus program for 30 minutes. Continue
as described in "Operation".
There will be a slight smell the first time the heating element is
heated.
The smell and any vapors will dissipate after a short time, and
do not indicate a faulty connection or appliance. It is
important to ensure that the room is well ventilated during this
process.
Before using for the first time
16