Miele DGC 4084 XL ss Product Manual - Page 56
To dismantle the door, Store the removed panes safely so they do not break.
View all Miele DGC 4084 XL ss manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Cleaning and Care To dismantle the door The door is protected all around by seals against the penetration of vapors. If soiling builds up in the space between the glass panels, you can disassemble the door to clean the inside of the glass. Do not use abrasive cleaners, hard sponges or brushes or sharp metal scrapers for cleaning glass surfaces. You will scratch the surface. Do not use oven cleaner. The surface of the aluminum will be damaged. Make sure that the glass panels are put back into the correct position after cleaning, since the individual sides of the panels are coated differently. The sides facing the oven interior are heat-reflective. Store the removed panes safely so they do not break. ,Always remove the door before you disassemble it. Place the door on a soft surface (such as a towel) to prevent scratches. It is advisable to put the handle next to the table edge, so that the glass is lying flat and cannot break during cleaning. ^ Unscrew the Torx screws, and remove the retainers. 56