Miele DGC 4084 XL ss Product Manual - Page 24

Quick Guide 24, Filling the water container, Selecting a mode, Setting the temperature

Page 24 highlights

Quick Guide Check that the drain filter is fitted correctly before each cooking program. Coarse food particles can clog the drain. Filling the water container Make sure you do not touch the appliance door handle while the panel is opening or closing. Danger of pinching fingers! ^ Select "Lift Panel" to open the control panel. ^ Remove the water container (right), and fill it up to at least the "min" mark. Use only cold tap water (below 68°F / 20°C). Do not use distilled water, sparkling water or other liquids. ^ Push the water container into the appliance until it connects. ^ Select the "Lift Panel" control then select "OK" to close the panel. Selecting a mode ^ Turn the appliance on "On/Off". ^ To select the desired mode touch the illuminated button next to the arrows in the display until the desired mode appears. ^ Press the illuminated button next to mode to select it. Setting the temperature ^ If you would like to use the default temperature, confirm with "OK". To change the temperature, enter the new temperature with either - / + or the numerical keypad. Confirm with "OK". 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76

Check that the drain filter is fitted correctly before each
cooking program. Coarse food particles can clog the
drain.
Filling the water container
Make sure you do not touch the appliance door handle
while the panel is opening or closing. Danger of pinching
fingers!
^
Select "Lift Panel" to open the control panel.
^
Remove the water container (right), and fill it up to at least
the "min" mark.
Use
only cold tap water
(below 68°F / 20°C). Do not use
distilled water, sparkling water or other liquids.
^
Push the water container into the appliance until it
connects.
^
Select the "Lift Panel" control then select "OK" to close the
panel.
Selecting a mode
^
Turn the appliance on "On/Off".
^
To select the desired mode touch the illuminated button
next to the arrows in the display until the desired mode
appears.
^
Press the illuminated button next to mode to select it.
Setting the temperature
^
If you would like to use the default temperature, confirm
with "OK".
To change the temperature, enter the new temperature with
either
-/+
or the numerical keypad. Confirm with "OK".
Quick Guide
24