Netgear DM111PSP DM111PSP User Manual - Page 35
Remote Access, Web Browser, Telnet - default ip
View all Netgear DM111PSP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Remote Access ADSL2+ Modem Router DM111PSPv2 User Manual You can set up the modem router to allow remote access. 1. In the Advanced section of the main menu, select Remote Management. The following screen displays: Figure 2-12 2. Select the Internet connection for which you want to allow remote access from the drop-down list. 3. Select the check box for the remote access that you want to allow. The selections are: • Web Browser. Select this check box to configure remote control through HTTP. The default port number is 8080. Choose a number between 0 and 65534, but do not use the number of any common service port. To access the modem router, type the modem router's WAN IP address into your browser's address field, followed by a colon (:), and then the custom port number. For example, if your external address is 10.0.0.123 and you use port number 8080, enter in your browser: http://10.0.0.123:8080. • Telnet. Select this check box to configure remote control through telnet. • TFTP. Select this check box to configure remote control through Trivial File Transfer Protocol (TFTP). Managing Your Modem Router v1.0, December 2008 2-13