Netgear DM111PSP DM111PSP User Manual - Page 70
TR 069 Client Configuration, Table 5-6., IP QoS Traffic Rule Settings continued
View all Netgear DM111PSP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
ADSL2+ Modem Router DM111PSPv2 User Manual Table 5-6. IP QoS Traffic Rule Settings (continued) Settings Description Traffic Destination MAC Address Conditions and MAC Mask (continued) Protocol Enter the destination MAC address and, if applicable, the MAC mask address of the traffic destination. Select a protocol (TCP/UDP, TCP, UDP, ICMP) from the dropdown list. Source IP Address and Subnet Mask Enter the source IP address and, if applicable, the subnet mask address of the traffic source. Source Port (Start-End): Enter the start IP address and end IP address of the source ports. Destination IP Address and Enter the destination IP address and, if applicable, the subnet Subnet Mask mask address of the traffic destination. Destination Port (Start-End) Enter the start IP address and end IP address of the destination ports. Assign Priority for this Traffic Rule Traffic Priority DiffServ Class (DSCP) Select a traffic priority value (Low, Medium, or High) from the drop-down list. Select a DSCP value from the drop-down list to overwrite the corresponding DSCP value in the IP header of the upstream packets WAN 802.1p Select a priority value (0 to 7) from the drop-down list to enable multicast filtering on the WAN. TR 069 Client Configuration Technical Report 069 (TR 069) is an application layer protocol for remote management of enduser devices such as your modem router. Using TR 069, you can specify an auto configuration server (ACS) for auto-configuration, provision, collection, and diagnostics of your modem router. Usually, the default settings on the TR 069 Client screen work fine. 5-12 v1.0, December 2008 Advanced WAN Configuration