Netgear DM111PSP DM111PSP User Manual - Page 40
Outbound Firewall Traffic Rules, settings on the Add New Outbound IP Filtering Rule screen.
View all Netgear DM111PSP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
ADSL2+ Modem Router DM111PSPv2 User Manual Outbound Firewall Traffic Rules When the Outbound Traffic radio button is selected and you click Add in the Firewall Rules screen (see Figure 3-1 on page 3-3), the Add New Outbound IP Filtering Rule screen displays (see following page). Figure 3-2 Create a new outbound IP filtering rule, and then click Apply to add the rule to the outbound traffic rules table in the Firewall Rules screen (see Figure 3-1 on page 3-3). Table 3-1 describes the settings on the Add New Outbound IP Filtering Rule screen. Table 3-1. Outbound IP Filtering Rule Settings Settings Allow Traffic Protocol Description Select a radio button • Yes. The new rule is used to allow outbound traffic. • No. The new rule is used to prevent outbound traffic Make a selection from the drop-down list: • TCP. The rule applies to Transmission Control Protocol (TCP) traffic. • UDP. The rule applies to User Datagram Protocol (UDP) traffic. • ICMP. The rule applies to Internet Control Message Protocol (ICMP) traffic. • AH. The rule applies to Authentication Header (AH) protocol traffic. • ESP. The rule applies to Encapsulating Security Payload (ESP) traffic. • GRE. The rule applies to Generic Route Encapsulation (GRE) traffic. • ALL. The rule applies to all protocol traffic. • User Defined. Enter a protocol name in the "as" field. 3-4 Security and Firewall Protection v1.0, December 2008