Netgear DM111PSP DM111PSP User Manual - Page 61
Table 5-2. ATM PVC Settings
View all Netgear DM111PSP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
ADSL2+ Modem Router DM111PSPv2 User Manual To add a new WAN connection: 1. On the WAN Setup screen, click Add, and the following screen displays: Figure 5-2 2. Enter or select the ATM PVC settings that are explained in the following table. Your ISP will advise you which settings to use. Table 5-2. ATM PVC Settings Setting Description VPI VCI Service Category The virtual path identifier specifies the virtual path between endpoints in an ATM network. The valid range is from 0 to 255. The virtual channel identifier) specifies the virtual channel between endpoints in an ATM network. The valid range is from 32 to 65535 (1 to 31 is reserved for wellknown protocols) The size and rate for the packets of the data is different, depending on the service type. UBR without peak cell rate (PCR) is the default setting.Your ISP will advise you which service category to select from the drop-down list: • UBR Without PCR. Unspecified bit rate without peak cell rate. • UBR With PCR. Unspecified bit rate with peak cell rate. • CBR. Constant bit rate. • Non Realtine VBR. Variable bit rate for non real-time applications. • Realtime VBR. Variable bit rate for real-time applications. Advanced WAN Configuration 5-3 v1.0, December 2008