Netgear EVA8000-100NAS User Manual - Page 80
Error Messages, Troubleshooting Tips, Table 7-1. Error messages - battery
UPC - 606449049787
View all Netgear EVA8000-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Error Messages The following table describes error messages and recommended actions when they occur. Table 7-1. Error messages Message Please configure the program guide location. No source device available. Action You need to enter your ZIP code in order to receive local news and weather. You need to configure the TV tuner card on your PC. Troubleshooting Tips Here are some tips for correcting simple problems that may prevent you from connecting to the Digital Entertainer HD. Table 7-2. Connecting to the Digital Entertainer HD Problem Solution I turned on my Digital Entertainer HD for the first time, but I do not see anything on the screen. • Check all cables to make sure they are connected properly, and be sure you are using the correct input on your TV. • Check that your TV's input selector (sometimes called TV/Video button) is set to the correct input. • If you still do not see anything, press TV Mode on the remote control to change the video mode. Make sure to pause for 3 seconds between button presses to allow the Digital Entertainer HD to change video modes. The Digital Entertainer HD does not respond to the remote control. Check the LED on the front panel of the Digital Entertainer HD to make sure the power is on. Make sure the television is turned on. The LED on the remote control should flash when you push a button. • If the LED does not flash, and the batteries are working, then the remote may be faulty. • If the LED does flash, reset the Digital Entertainer HD. 7-4