Netgear FE516 Installation Guide - Page 14

Installation Guide for the Model FE508 and FE516 Fast Ethernet Hubs Terminator LED The Terminator LED, located on the rear panel of the hub, indicates that the built-in terminator in that hub is active. When two or more hubs are cascaded together in a stack, the Terminator LED on the top-most hub and the LED on the bottom-most hub should be lit to indicate that the terminator is active in those hubs. The Terminator LED on the center hubs should not be lit. Use Table 2-2 to determine which hubs in a stack should have the terminator active (LED on). Table 2-2. Terminator LED status in a stack of hubs Number of hubs 1 2 3 or more Terminator LED Lit Both LEDs lit Top and bottom LEDs lit, middle LEDs off Fan Outlets Two fans cool the hub. Do not block the fan outlets, located on the rear panel, when installing in a rack or on a tabletop or other flat surface. Power Receptacle The AC power receptacle is provided for connection to the AC power outlet. The hub accepts between 100 and 240 V AC, 50/60 Hz. Physical Description 2-7