Netgear FE516 Installation Guide - Page 25
Troubleshooting
UPC - 606449000177
View all Netgear FE516 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Chapter 4 Troubleshooting This chapter provides information about troubleshooting the hub. Hub status can be monitored through the front panel and port indicators (refer to Chapter 2, "Physical Description," for a description and location of the LEDs). Verifying the LED Conditions At power on, verify the following LED conditions: • Power LED is on. • Link LED on each connected port is lit. • Terminator LED on the rear panel is: − Lit for a single hub. − Lit on the top and bottom hubs in a stack. − Off on the middle hub(s) in the stack. Troubleshooting the Hub and Network Use Table 4-1 to troubleshoot the hub and network. Troubleshooting 4-1
Troubleshooting
4-1
Chapter 4
Troubleshooting
This chapter provides information about troubleshooting the hub. Hub status can be monitored
through the front panel and port indicators (refer to Chapter 2, “Physical Description,” for a
description and location of the LEDs).
Verifying the LED Conditions
At power on, verify the following LED conditions:
•
Power LED is on.
•
Link LED on each connected port is lit.
•
Terminator LED on the rear panel is:
-
Lit for a single hub.
-
Lit on the top and bottom hubs in a stack.
-
Off on the middle hub(s) in the stack.
Troubleshooting the Hub and Network
Use Table 4-1 to troubleshoot the hub and network.