Netgear MBR1310 MBR1310 User Manual - Page 17
Connect, Apply, Cancel, Refresh, Discard changes. - external antenna
View all Netgear MBR1310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
NETGEAR Mobile Broadband 11n Wireless Router MBR1310 Fields and Check Boxes Description Internet Service Provider Select your Internet service provider from the drop-down list. Access Number The remote site's phone number. APN Access point name. PDP type Select the type of packet data protocol: • IP • PDP-IP • PPP • PPP-IP Connect automatically at startup When this check box is selected, the modem automatically connects to the network when powered up. This should be selected after login information is provided. Reconnect automatically when connection is lost When this check box is selected, the modem attempts to reconnect to the network when the connection is lost. Under normal situations, this setting should be selected. Use internal antenna If this check box is selected, the router uses the internal antenna rather than the external antenna. Wireless Button Configuration Select the option to determine the behavior of the WPS button on the front panel when it is pressed. • WiFi Only. Pressing the push button toggles the WiFi function. If WiFi is turned on, pressing the push button turns off the WiFi. Pressing it again turns on the WiFi. This function is available only if the WiFi function is enabled. The wireless broadband function is unaffected. • WiFi and Mobile Broadband. Pressing the push button toggles both the WiFi function and wireless broadband at the same time. If WiFi is turned on, pressing the button turns off the WiFi. At the same time, the wireless broadband connection is disconnected. If you press the button again, WiFi is turned on and the router attempts to reestablish the wireless broadband connection. Depending on the coverage, wireless broadband coverage might or might not be connected successfully. Connection status Current WAN port status. 4. The following buttons are available: • Connect. Manually connect to the network. • Disconnect. Disconnect from the current network. • Apply. Apply the changes that you made. • Cancel. Discard changes. • Refresh. Update the connection status. Connecting to the Internet 17