Netgear MBR1310 MBR1310 User Manual - Page 95
A. Factory Default Settings and Technical Specifications, Factory Default Settings
View all Netgear MBR1310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
A A. Factory Default Settings and Technical Specifications Factory Default Settings You can use the Restore Factory Settings button located on the bottom of your router to reset all settings to their factory defaults. This is called a hard reset. To perform a hard reset, press and hold the Restore Factory Settings button for 6 seconds. Your router will return to the factory configuration settings that are shown in the following table. Feature Router login User login URL User name (case-sensitive) Login password (case-sensitive) Internet WAN MAC address connection WAN MTU size Port speed Local network (LAN) LAN IP Subnet mask RIP direction RIP version RIP authentication DHCP server DHCP starting IP address DHCP ending IP address DMZ Time zone Daylight saving time adjustment Default Behavior http://www.routerlogin.net or http://www.routerlogin.com admin password Use default address 1500 AutoSense 192.168.0.1 255.255.255.0 None Disabled None Enabled 192.168.0.2 192.168.0.254 Disabled GMT Disabled 95